pvlan pvlan-trunk

Creates a Private VLAN domain with Primary-Secondary pair. Maps ISL and host ports to VLAN based forwarding in PVLAN domain.
Syntax
pvlan pvlan-trunk num ethernet unit/slot/port [ to unit/slot/port | [ ethernet unit/slot/port to unit/slot/port | ethernet unit/slot/port ]... ]
no pvlan pvlan-trunk num ethernet unit/slot/port [ to unit/slot/port | [ ethernet unit/slot/port to unit/slot/port | ethernet unit/slot/port ]... ]
pvlan pvlan-trunk num lag decimal [ to decimal | [ lag decimal to decimal | lag decimal ]... ]
no pvlan pvlan-trunk num lag decimal [ to decimal | [ lag decimal to decimal | lag decimal ]... ]
Command Default

The inter-switch link for the primary VLAN is not configured.

Parameters
num
Secondary VLAN ID to be mapped to Primary.
ethernet unit/slot/port
Specifies the ethernet interface ( stack ID or Slot or port) to which the secondary VLAN is to be mapped.
to unit/slot/port
Configures a range of Ethernet interfaces as the ISLs.
lag decimal
Specifies the LAG interface (decimal) to which the secondary VLAN is to be mapped.
to decimal
Configures a set of LAG virtual interfaces as the ISLs.
Modes

VLAN configuration mode

Privileged EXEC mode

Usage Guidelines

Issue this command only on Primary VLAN. Secondary VLAN for which an inter-switch link is to be created should be VALID. Port or LAG on which an inter-switch link is to be created should be a member of Primary VLAN.

The no form of the command removes the ISL port or LAG.

Examples

The following example shows on Ethernet interfaces how to identify the ISL in the PVLAN. 

device(config)# vlan 100
device(config-vlan-100)# tagged ethernet 1/1/10 to 1/1/11
device(config-vlan-100)# untagged ethernet 1/1/4
device(config-vlan-100)# pvlan type primary
device(config-vlan-100)# pvlan mapping 101 ethernet 1/1/4
device(config-vlan-100)# pvlan mapping 102 ethernet 1/1/4
device(config-vlan-100)# pvlan pvlan-trunk 101 ethernet 1/1/10 to 1/1/11
History
Release version Command history
08.0.61 This command was modified to support the LAG ID option.
08.0.70 This command was modified to support mapping of secondary VLAN to promiscuous port or LAG.
Parent topic: Commands O, P, Q, R, and Sa through Sh