ports
ports
ethernet
stackid/slot/port
[
to
stackid/slot/port
|
[
ethernet
stackid/slot/port
to
stackid/slot/port
|
ethernet
stackid/slot/port
] ...
]
no ports
ethernet
stackid/slot/port
[
to
stackid/slot/port
|
[
ethernet
stackid/slot/port
to
stackid/slot/port
|
ethernet
stackid/slot/port
] ...
]
No ports are added to the LAG.
LAG configuration mode
A static or dynamic LAG can have 1 to 8 or 1 to 16 ports (depending on the device you are using) of the same type and speed that are on any interface module within the RUCKUS chassis. A keep-alive LAG consists of only one port.
Ports can be added to an undeployed LAG or to a currently deployed LAG. If removal of a port will result in the trunk threshold value becoming greater than the number of ports in the LAG, the port deletion will be rejected. When you remove a port from a deployed LAG, the port is disabled automatically.
The following example shows how to configure a static LAG with two ports.
device(config)# lag blue static id 1 device(config-lag-blue)# ports ethernet 1/3/1 ethernet 1/3/2
The following example adds a range of ports to the LAG.
device(config)# lag blue static device(config-lag-blue)# ports ethernet 1/3/1 to 1/3/4