radius-server accounting

Configures to send interim updates of accounting messages to the RADIUS server at regular intervals..
Syntax
radius-server accounting { interim-updates | interim-interval value}
no radius-server accounting { interim-updates | interim-interval value}
Command Default

Accounting updates are disabled. The default interim interval is zero.

Parameters
interim-updates
Enables the interim accounting updates.
interim-interval value
Sets the interval between each interim update. Default value is 0. The range of valid values is from 5 through 1440 minutes.
Modes

Global configuration mode

Usage Guidelines

The RADIUS accounting for 802.1X authentication and MAC authentication accepts either the interim update interval value configured using the RADIUS attribute or the interval time value set on the device, whichever is higher.

The no form of the command resets the feature to the default values.

Examples

The following example enables interim updates and set accounting update intervals for 802.1X authentication accounting and MAC authentication accounting as 10 minutes. 

device# configure terminal
device(config)# radius-server accounting interim-updates
device(config)# radius-server accounting interim-interval 10
History
Release version Command history
08.0.50 This command was introduced.
Parent topic: Commands O, P, Q, R, and Sa through Sh