port-profile

Configures a port profile on the device.

Syntax

port-profile port-profile-name

no port-profile [ port-profile-name ]

Command Default

By default, no port profile is created.

Parameters

Modes

Global configuration mode

Usage Guidelines

Port profiles are supported only on physical Ethernet ports. They are not supported on LAG interfaces, LAG member ports, or management ports.

The no form of the command without a port-profile name removes all configured port profiles.

Examples

The following example creates a static port profile and specifies the interface to which the profile is applied.

device# configure terminal
device(config)# port-profile profile1
device(config-port-profile-profile1)# ports ethernet 1/1/5

The following example creates a dynamic port profile and configures a Link Layer Discovery Protocol (LLDP) device entry.

device# configure terminal
device(config)# port-profile profile1
device(config-port-profile-profile1)# lldp-device system-name RuckusAP system-desc R720

The following example configures a MAC-OUI entry.

device# configure terminal
device(config)# port-profile profile1
device(config-port-profile-profile1)# mac-oui F8:E7:1E

History

Release version	Command history
10.0.10	The command was introduced.

Commands O, P, Q, R, and Sa through Sh

port-profile