Commands O, P, Q, R, and Sa through Sh

• 1 Commands O, P, Q, R, and Sa through Sh
  • 1.1 ocsp (PKI)
  • 1.2 ocsp-url (PKI)
  • 1.3 opaque-capability (OSPFv2)
  • 1.4 openflow controller
  • 1.5 openflow default send-to-controller
  • 1.6 openflow enable
  • 1.7 openflow hello-reply disable
  • 1.8 openflow log timeout
  • 1.9 openflow protected-vlans
  • 1.10 openflow purge-time
  • 1.11 optical-monitor
  • 1.12 option
  • 1.13 originator-id
  • 1.14 other-proto
  • 1.15 overlay-gateway
  • 1.16 owner
  • 1.17 packet-inerror-detect
  • 1.19 password
  • 1.20 pdu-rate (EFM-OAM)
  • 1.23 peer
  • 1.24 peer disable-fast-failover
  • 1.25 peer timers
  • 1.26 peer-info
  • 1.27 permit (Extended IPv4 ACLs and IPv6 ACLs)
  • 1.28 permit (Standard IPv4 ACLs)
  • 1.29 phy cable-diagnostics tdr
  • 1.31 ping
  • 1.32 pki authenticate
  • 1.33 pki cert-validate
  • 1.34 pki enroll
  • 1.35 pki-entity
  • 1.36 pki profile-enrollment
  • 1.37 pki trustpoint
  • 1.38 poison-local-routes
  • 1.39 poison-reverse
  • 1.40 pool (DHCPv6)
  • 1.41 port security
  • 1.42 port-down-authenticated-mac-cleanup
  • 1.43 port-name
  • 1.44 port-name (LAG)
  • 1.45 port-profile
  • 1.46 port-statistics-reset-timestamp enable
  • 1.47 ports
  • 1.48 preferred-lifetime (DHCPv6)
  • 1.49 prefix6 (DHCPv6)
  • 1.50 prefix-list
  • 1.51 prefix-list (RIP)
  • 1.52 preforwarding-time
  • 1.53 pre-shared-key
  • 1.54 prf
  • 1.55 priority
  • 1.56 priority-flow-control
  • 1.57 priority-flow-control enable
  • 1.58 privilege
  • 1.59 profile-config
  • 1.60 proposal (IKEv2)
  • 1.62 protected
  • 1.63 protected-port
  • 1.64 prune-timer
  • 1.65 prune-wait
  • 1.66 pstat
  • 1.67 pstat field-add
  • 1.68 pstat field-delete
  • 1.69 pstat max
  • 1.70 pstat save
  • 1.71 ptp-clock transparent
  • 1.72 pvlan mapping
  • 1.73 pvlan pvlan-trunk
  • 1.74 pvlan type
  • 1.75 pvst-mode
  • 1.76 pvstplus-protect
  • 1.77 qd-buffer
  • 1.78 qd-descriptor
  • 1.79 qos egress-buffer-profile port-share-level
  • 1.80 qos egress-buffer-profile queue-share-level
  • 1.81 qos egress-shape-ifg-bytes
  • 1.83 qos guaranteed-rate
  • 1.84 qos mechanism
  • 1.85 qos monitor-queue-drop-counters
  • 1.86 qos name
  • 1.87 qos priority-to-pg
  • 1.88 qos profile
  • 1.89 qos scheduler-profile
  • 1.90 qos sflow-set-cpu-rate-limit
  • 1.91 qos tagged-priority
  • 1.93 qos-tos map dscp-priority
  • 1.94 radius-client coa host
  • 1.95 radius-client coa port
  • 1.96 radius-server accounting
  • 1.97 radius-server dead-time
  • 1.99 radius-server host
  • 1.100 radius-server key
  • 1.101 radius-server retransmit
  • 1.102 radius-server test
  • 1.103 radius-server timeout
  • 1.104 raguard
  • 1.105 range6 (DHCPv6)
  • 1.106 rapid-commit (DHCPv6)
  • 1.107 rarp
  • 1.108 rate-limit-arp
  • 1.109 rate-limit input
  • 1.110 rate-limit output
  • 1.111 rate-limit-log
  • 1.112 rconsole
  • 1.114 rd
  • 1.115 re-authentication (Flexible Authentication)
  • 1.116 rear-module
  • 1.117 reauth-period
  • 1.118 reauth-time
  • 1.119 rebind-time (DHCPv6)
  • 1.120 redistribute
  • 1.121 redistribute (BGP)
  • 1.122 redistribute (RIP)
  • 1.123 redistribute (RIPng)
  • 1.124 refresh-time (DHCPv6)
  • 1.125 regenerate-seq-num
  • 1.126 register-probe-time
  • 1.127 register-rate-limit
  • 1.128 register-suppress-time
  • 1.129 relative-utilization
  • 1.130 reload
  • 1.131 remark
  • 1.132 remote-identifier
  • 1.133 remote-loopback
  • 1.134 remove-tagged-ports
  • 1.135 remove-untagged-ports
  • 1.136 remove-vlan (VLAN Group)
  • 1.137 renewal-time (DHCPv6)
  • 1.139 reserved-vlan-map
  • 1.140 responder-only
  • 1.141 restart-ports
  • 1.142 restart-vsrp-port
  • 1.143 restconf config-sync
  • 1.144 restconf config-sync-interval
  • 1.145 restconf enable
  • 1.146 restconf enable-config-sync
  • 1.147 restricted-vlan
  • 1.148 reverse-manifest-enable
  • 1.149 reverse-path-check
  • 1.150 revocation-check (PKI)
  • 1.151 rfc1583-compatibility (OSPF)
  • 1.152 ring-interfaces
  • 1.153 rmon alarm
  • 1.154 rmon event
  • 1.155 rmon history
  • 1.156 route-map
  • 1.157 route-only
  • 1.158 route-precedence
  • 1.159 route-precedence admin-distance
  • 1.160 router bgp
  • 1.161 router msdp
  • 1.162 router ospf
  • 1.163 router pim
  • 1.164 router rip
  • 1.165 router vrrp
  • 1.166 router vrrp-extended
  • 1.167 router vsrp
  • 1.168 rp-address
  • 1.169 rp-adv-interval
  • 1.170 rp-candidate
  • 1.171 rp-embedded
  • 1.172 rpf-mode
  • 1.173 rsakeypair (PKI)
  • 1.174 rspan destination
  • 1.175 rspan source
  • 1.176 rspan-vlan
  • 1.177 sa-filter
  • 1.178 save-current-values
  • 1.179 scale-timer
  • 1.181 scheduler-profile
  • 1.183 securewipe
  • 1.184 secure-login
  • 1.185 secure-mac-address
  • 1.186 send-lifetime
  • 1.187 sequence (permit | deny in Extended IPv4 ACLs)
  • 1.188 sequence (permit | deny in IPv6 ACLs)
  • 1.189 sequence (permit | deny in Standard IPv4 ACLs)
  • 1.190 server (NTP)
  • 1.191 service local-user-protection
  • 1.193 set interface null0
  • 1.194 set ip next-hop
  • 1.195 set next-hop-ip-tunnel
  • 1.196 sflow agent-ip
  • 1.197 sflow destination
  • 1.198 sflow enable
  • 1.199 sflow export
  • 1.200 sflow forwarding
  • 1.201 sflow forwarding (LAG)
  • 1.202 sflow management-vrf-disable
  • 1.203 sflow max-packet-size
  • 1.204 sflow polling-interval
  • 1.205 sflow sample
  • 1.206 sflow source
  • 1.207 sflow source-port
  • 1.208 sflow version
  • 1.209 short-path-forwarding