Enabling LACP Support for an AP Group

Perform the following procedure to enable the LACP support for an AP group.
  1. From the main menu, go to Network > Wireless, select Access Points.
  2. Select an AP group from the zone and click .
  3. Under Model Specific Options, select R720 from the Select an AP Model list.
  4. Under General Options, enable LACP.
    Note: By default, LACP is disabled. To enable LACP, both LACP and Override must be enabled.
    Note: To support the LACP and LAG feature on RUCKUS APs, ensure that the correct PoE mode is selected to bring up LAN1,2 ports. For example, PoE-at+ for R720, PoE-at for R710. The LACP and LAG UL throughput is limited to around 1Gbps.
  5. Click OK.

In this section:

  1. Creating a Bond Port Profile
    A bond port profile establishes the VLAN parameters in the newly created LACP configuration. Different bond port profiles can be created and assigned per model specific configurations at the AP Zone, Group or individual AP level.
Parent topic: Link Aggregration Protocol (LACP)