Find Technical Content
  • Home
  • Ruckus Support Portal
  • Ruckus Networks
  • Table of Contents
  • Dark Mode

Powered by Titania Delivery

⚠ This cached page may be outdated. Click refresh to get the latest content.
Cached Version You are Offline

You are viewing a cached version of this page.

You are currently offline. This page was loaded from cache.

RUCKUS SmartZone (LT-GA) Access Points and Switch Management Guide, 7.1.1 800-73747-001 Rev C

  • Preface
    • 3 Contact Information, Resources, and Conventions
      • 3.1 Contacting RUCKUS Customer Services and Support
      • 3.2 Document Feedback
      • 3.3 RUCKUS Product Documentation Resources
      • 3.4 Online Training Resources
      • 3.5 Document Conventions
      • 3.6 Command Syntax Conventions
    • 4 About This Guide
      • 4.1 About This Guide
      • 4.2 New In This Document
    • 5 Licensing Requirements for Managing Access Points and Switches
      • 5.1 AP and Switch Capacity Licenses
        • 5.1.1 Verifying the Available AP Capacity Licenses in the Controller
        • 5.1.2 Verifying the Available Switch Capacity Licenses in the Controller
      • 5.2 AP Support Licenses
        • 5.2.1 Verifying the Access Point Support Licenses
    • 6 SmartZone Network Hierarchy
      • 6.1 SmartZone Domains
        • 6.1.1 Partner Domains
      • 6.2 Zones
        • 6.2.1 AP Groups
      • 6.3 WLAN Groups
      • 6.4 Switch Groups
    • 7 Managing Domains
      • 7.1 Creating a Domain
        • 7.1.1 Creating a Partner Domain
      • 7.2 Limiting the Number of APs in a Domain or Zone
      • 7.3 Limiting the AP count for a Partner Domain or a System Zone
      • 7.4 Limiting the AP count for a Zone in a Partner Domain
    • 8 Working with Zones
      • 8.1 Creating a Zone
      • 8.2 Moving a Zone Location
      • 8.3 Viewing Zone Templates
      • 8.4 Creating a New Zone using a Zone Template
      • 8.5 Extracting a Zone Template
      • 8.6 Applying a Zone Template
      • 8.7 Configuring Templates
        • 8.7.1 Creating Zone Templates
        • 8.7.2 Exporting Zone Templates
        • 8.7.3 Importing Zone Templates
    • 9 Access Point Management
      • 9.1 AP Groups
        • 9.1.1 Working with AP Groups
        • 9.1.2 Creating an AP Group
      • 9.2 AP Provisioning and Swapping
        • 9.2.1 Working with AP Registration Rules
        • 9.2.2 Creating an AP Registration Rule
        • 9.2.3 Configuring Registration Rule Priorities
        • 9.2.4 AP MAC OUI Address
          • 9.2.4.1 Creating an AP MAC OUI Address
        • 9.2.5 Setting a Global Country Code
        • 9.2.6 Configuring the Tunnel UDP Port
        • 9.2.7 Provisioning and Swapping Access Points
        • 9.2.8 Options for Provisioning and Swapping APs
        • 9.2.9 Approving Access Points
        • 9.2.10 Approving Mesh APs
        • 9.2.11 Viewing Mesh APs
        • 9.2.12 ZD Migration
          • 9.2.12.1 ZoneDirector to SmartZone Migration
      • 9.3 Working with Access Points
        • 9.3.1 Moving a Single Access Point to a Different Zone
        • 9.3.2 AP Switchover
          • 9.3.2.1 Configuring AP Switchover
          • 9.3.2.2 Switch Over Managed APs and External DPs
        • 9.3.3 Rehoming Managed APs
          • 9.3.3.1 AP Auto Rehome
        • 9.3.4 Rebalancing APs
        • 9.3.5 Configuring Node Affinity
          • 9.3.5.1 Enabling Node Affinity
          • 9.3.5.2 Disabling Node Affinity
        • 9.3.6 Triggering a Preferred Node
      • 9.4 Configuring Access Points
        • 9.4.1 Configuring Access Points
        • 9.4.2 Access Point and Zone Configuration Options
          • 9.4.2.1 General Options
          • 9.4.2.2 Mesh Options
          • 9.4.2.3 Band Combination Options
          • 9.4.2.4 Band/Spectrum Configuration
          • 9.4.2.5 AP GRE Tunnel Options
          • 9.4.2.6 Syslog Options
          • 9.4.2.7 AP SNMP Options
          • 9.4.2.8 Cellular Options
          • 9.4.2.9 Advanced Options
        • 9.4.3 Power Source in AP Configuration
        • 9.4.4 Swap Configuration
          • 9.4.4.1 Editing Swap Configuration
        • 9.4.5 AP CLI Scripts
          • 9.4.5.1 AP CLI Scripts
          • 9.4.5.2 Uploading AP CLI Scripts
          • 9.4.5.3 Executing AP CLI Scripts
          • 9.4.5.4 Scheduling AP CLI Scripts
          • 9.4.5.5 Viewing Scripts
          • 9.4.5.6 Viewing the Script Execution Summary
      • 9.5 AP Model Specific Configuration
        • 9.5.1 AP Model Specific Configuration
          • 9.5.1.1 LED Advanced Mode
          • 9.5.1.2 LED Off Delay
          • 9.5.1.3 Configuring LED Off Delay for an AP
        • 9.5.2 Configuring Model-Based Settings
        • 9.5.3 Configuring the Port Settings of a Particular AP Model
        • 9.5.4 AP Ethernet Ports
          • 9.5.4.1 Creating an Ethernet Port Profile
          • 9.5.4.2 Designating an Ethernet Port Type
          • 9.5.4.3 Access Ports
          • 9.5.4.4 Trunk Ports
          • 9.5.4.5 General Ports
        • 9.5.5 Link Aggregration Protocol (LACP)
          • 9.5.5.1 Link Aggregation Control Protocol (LACP) support for R720 AP
          • 9.5.5.2 Enabling the LACP Support for a Zone
          • 9.5.5.3 Enabling LACP Support for an AP
          • 9.5.5.4 Enabling LACP Support for an AP Group
            • 9.5.5.4.1 Creating a Bond Port Profile
      • 9.6 Radio Band Features
        • 9.6.1 Band or Spectrum Configuration
        • 9.6.2 Auto Cell Sizing
        • 9.6.3 ChannelFly and Background Scanning
        • 9.6.4 BSS Coloring
        • 9.6.5 Band Balancing
        • 9.6.6 Client Load Balancing
        • 9.6.7 Automated Frequency Coordination System
          • 9.6.7.1 AFC Power Modes
          • 9.6.7.2 RUCKUS AFC System Architecture
          • 9.6.7.3 How RUCKUS AP Geolocation Works
          • 9.6.7.4 Mobile Applications
          • 9.6.7.5 Enabling Automated Frequency Coordination from SmartZone
          • 9.6.7.6 Checking Automated Frequency Coordination Status
        • 9.6.8 Multi Link Operation (MLO)
      • 9.7 AP Services
        • 9.7.1 DHCP & NAT
          • 9.7.1.1 AP Based DHCP or NAT
          • 9.7.1.2 Network Topology
          • 9.7.1.3 Hierarchical Network Topology
          • 9.7.1.4 Configuring AP-based DHCP Service Settings
          • 9.7.1.5 Creating an AP DHCP Pool
          • 9.7.1.6 Configuring DHCP Server or NAT Router with Mesh Options
        • 9.7.2 Domain Name System (DNS)
          • 9.7.2.1 Creating a DNS Server Profile
          • 9.7.2.2 Creating a DNS Spoofing Profile
        • 9.7.3 Managing AP Certificates
        • 9.7.4 Restricted Access Overview
      • 9.8 AP Status
        • 9.8.1 AP Status
        • 9.8.2 SCI Thresholds for each AP
        • 9.8.3 Monitoring the Network
        • 9.8.4 Viewing Managed Access Points
        • 9.8.5 Monitoring Access Points
        • 9.8.6 Viewing General AP Information
        • 9.8.7 Viewing LLDP Neighbors
          • 9.8.7.1 Supported LLDP Attributes
        • 9.8.8 Tagging Critical APs
        • 9.8.9 Working with Maps
          • 9.8.9.1 Importing a Floorplan Map
          • 9.8.9.2 Viewing RF Signal Strength
          • 9.8.9.3 Monitoring APs Using the Map View
        • 9.8.10 Viewing AP Health Indicators
        • 9.8.11 Health
          • 9.8.11.1 Health
            • 9.8.11.1.1 Understanding Cluster and AP Health Icons
            • 9.8.11.1.2 Customizing Health Status Thresholds
              • 9.8.11.1.2.1 Customizing AP Flagged Status Thresholds
            • 9.8.11.1.3 Using the Health Dashboard Map
            • 9.8.11.1.4 Configuring the Google Map API Key Behavior
        • 9.8.12 Viewing AP Performance
        • 9.8.13 Viewing AP Connection Failures
        • 9.8.14 AP Traffic Indicators
          • 9.8.14.1 Viewing AP Traffic Indicators
          • 9.8.14.2 Traffic Analysis for Wireless Clients
          • 9.8.14.3 Customizing Traffic Analysis
          • 9.8.14.4 Configuring Traffic Analysis Display for APs
          • 9.8.14.5 SmartCell Insight Report on Actual Traffic Rate for APs and Client
        • 9.8.15 Neighbor APs
          • 9.8.15.1 Viewing Neighbor APs in a Non-Mesh Zone
        • 9.8.16 Reports
          • 9.8.16.1 Rogue Devices
            • 9.8.16.1.1 Viewing Rogue Devices
            • 9.8.16.1.2 Marking Rogue Access Points
            • 9.8.16.1.3 Locating a Rogue Device
          • 9.8.16.2 Historical AP Client Stats
            • 9.8.16.2.1 Viewing AP Client Statistics
        • 9.8.17 External Syslog Server
          • 9.8.17.1 External Syslog Server
      • 9.9 AP Wireless Clients
        • 9.9.1 AP Wireless Clients
        • 9.9.2 Wireless Clients
        • 9.9.3 Deauthorizing a Wireless Client
        • 9.9.4 Blocking a Wireless Client
        • 9.9.5 Unblocking a Wireless Client
        • 9.9.6 Disconnecting a Wireless Client
        • 9.9.7 Viewing a Summary of Wireless Clients
        • 9.9.8 Viewing Wireless Client Details
        • 9.9.9 Traffic Analysis for Wireless Clients
          • 9.9.9.1 Adjusting the Traffic Analysis Display for Top Clients
          • 9.9.9.2 SmartCell Insight Report on Actual Traffic Rate for APs and Client
      • 9.10 AP Wired Clients
        • 9.10.1 Wired Clients
        • 9.10.2 Viewing a Summary of Wired Clients
        • 9.10.3 Deauthorizing a Wired Client
      • 9.11 AP Upgrade
        • 9.11.1 AP Firmware Version
        • 9.11.2 Changing the AP Firmware Version of the Zone
        • 9.11.3 Scheduling a Zone Firmware Upgrade
        • 9.11.4 Uploading an AP Patch File
        • 9.11.5 Troubleshooting with AP Firmware Files
        • 9.11.6 Secure Boot
    • 10 Switch Management
      • 10.1 Supported ICX Models
      • 10.2 Overview of ICX Switch Management
      • 10.3 ICX Switch Behavior with SmartZone
        • 10.3.1 Data Synching on the Switch Table
        • 10.3.2 Preparing Stacking Devices to Connect to SmartZone
        • 10.3.3 Configuring the ICX Source Address to Be Used by SmartZone
        • 10.3.4 Configuring a Custom Port Number for Connection to SmartZone
      • 10.4 Connecting the ICX to the SmartZone Controller
        • 10.4.1 Setting Up Switch Registrar Discovery
        • 10.4.2 Configuring DHCP to Provide SmartZone IP Addresses to an ICX Switch
        • 10.4.3 Manually Configuring the SmartZone IP Address on an ICX Switch
      • 10.5 Approving and Registering switches
        • 10.5.1 ICX Pre-Provisioning into SmartZone
          • 10.5.1.1 Pre-Provisioning Switches in the Controller
        • 10.5.2 Creating Switch Registration Rules
        • 10.5.3 Approving Switches
        • 10.5.4 Moving the Switches between Groups
        • 10.5.5 Deleting Switches
        • 10.5.6 Switching Over Clusters
        • 10.5.7 Rehoming Switches
      • 10.6 ICX to SmartZone Connection Status
        • 10.6.1 Displaying the SmartZone Connection Status
        • 10.6.2 Disconnecting the ICX Switch from SmartZone
        • 10.6.3 Disabling SmartZone Management on the ICX Switch
      • 10.7 Switch Configuration
      • 10.8 Configuring the Switches
        • 10.8.1 Switch Groups
          • 10.8.1.1 Creating Switch Groups
          • 10.8.1.2 Group Level Configuration
          • 10.8.1.3 Port Level Configuration
            • 10.8.1.3.1 Selective QinQ
              • 10.8.1.3.1.1 Configuring Selective QinQ
            • 10.8.1.3.2 Support of Breakout Ports on an ICX Switch
              • 10.8.1.3.2.1 Enabling Switch Breakout Ports
              • 10.8.1.3.2.2 Disabling Breakout Ports on the Controller
          • 10.8.1.4 Switch Level Configuration
            • 10.8.1.4.1 Creating Switch Level Configuration
            • 10.8.1.4.2 Copying Configuration
            • 10.8.1.4.3 QoS SGT
              • 10.8.1.4.3.1 Configuring QoS SGT
        • 10.8.2 BGP EVPN
          • 10.8.2.1 BGP EVPN Multihoming Overview
          • 10.8.2.2 BGP EVPN Multihoming (Dual Homing) Network Topology
          • 10.8.2.3 Creating a BGP EVPN Route Reflector Profile
          • 10.8.2.4 Creating a BGP EVPN Full Mesh Profile
          • 10.8.2.5 Managing BGP EVPN Profiles
          • 10.8.2.6 Monitoring ICX Fabric Information
        • 10.8.3 Creating Authentication Profiles
        • 10.8.4 Configuring Switch AAA Servers
        • 10.8.5 Configuring Switch AAA Settings
        • 10.8.6 Creating Routing Configurations
        • 10.8.7 Copying Switch Group Configuration
        • 10.8.8 Group Level CLI Configuration
        • 10.8.9 Copy Config as Template
          • 10.8.9.1 Creating a CLI Template from an Existing Switch Backup Configuration
        • 10.8.10 Zero Touch Provisioning using Group level Configuration
        • 10.8.11 Model-Based Configurations
        • 10.8.12 Creating a Common Configuration
        • 10.8.13 Port Settings
          • 10.8.13.1 Creating and Managing Port Templates
          • 10.8.13.2 Port MAC Security
            • 10.8.13.2.1 Configuring Port MAC Security
          • 10.8.13.3 Configuring Port Settings for a Switch
          • 10.8.13.4 Editing Ports Across Multiple Switches
          • 10.8.13.5 Managing Link Aggregation Groups (LAGs)
        • 10.8.14 Creating a Switch Stack
          • 10.8.14.1 Ability to Convert Standalone Switch to Stack
          • 10.8.14.2 Viewing Stack Port Details
        • 10.8.15 Accessing the Switch CLI through Controller (Remote CLI)
        • 10.8.16 Backing up and Restoring Switch Configuration
          • 10.8.16.1 Creating Config Backup for Switch Group
          • 10.8.16.2 Viewing Configuration Alerts
        • 10.8.17 Viewing Switch Information
          • 10.8.17.1 Initiated By
            • 10.8.17.1.1 Viewing the Configuration History of Switches
      • 10.9 Firmware Upgrade
        • 10.9.1 Uploading the Switch Firmware to the Controller
        • 10.9.2 Configuring the Group Firmware Settings
        • 10.9.3 Scheduling a Firmware Upgrade for Switch Group
        • 10.9.4 Scheduling a Firmware Upgrade for Selected Switches
        • 10.9.5 Deleting the Firmware Upgrade Schedules
      • 10.10 Monitoring Switch Status
        • 10.10.1 Viewing Switch Health
        • 10.10.2 Viewing Alarms
        • 10.10.3 Viewing the Events
        • 10.10.4 Viewing LLDP Neighbor Information
        • 10.10.5 Viewing Traffic Trends in the Switch
        • 10.10.6 Viewing Firmware History of the Switch
        • 10.10.7 Viewing PoE Utilization and Health Status of the Switch
        • 10.10.8 Viewing Switches on the Dashboard
        • 10.10.9 Improving Switch Configuration Change Management
      • 10.11 Switch Clients
        • 10.11.1 Switch Clients
    • 11 Reports
      • 11.1 Report Generation
        • 11.1.1 Creating Reports
        • 11.1.2 Generating Reports

AP Support Licenses

Apart from the AP Capacity licenses, which are for onboarding and managing the APs, AP Support licenses are required to complete any AP software upgrades using the controller. The AP Support license entitles 100% of your onboarded APs to software upgrades and RUCKUS Support assistance.

In this section:

  1. Verifying the Access Point Support Licenses
Parent topic: Licensing Requirements for Managing Access Points and Switches

Did you find what you were looking for?

Thanks!

Ruckus Wireless

© 2026 Ruckus Wireless LLC All rights reserved.

  • Accessibility
  • Privacy & Cookies
  • Do Not Sell My Information
  • Trademarks
  • Terms
  • Feedback