wips
Use the following command to enter the config-wips context and configure WIPS settings:
Syntax Description
- protect-excessive-wireless-request
- Enables protecting the wireless network against excessive wireless requests
- temp-block-auth-failed-client time NUMBER
- Temporarily block wireless clients with repeated authentication failures for the specified time (in seconds)
- rogue-report [ all ] | [ malicious ssid-spoofing | same-network | user-blocked | mac-spoofing]
- Enables report rogue devices in ZD event log.
Example
ruckus(config)# wips
ruckus(config-wips)# show
Protect my wireless network against excessive wireless requests= Disabled
Temporarily block wireless clients with repeated authentication failures:
Status= Enabled
Time= 30 seconds
Report rogue devices in ZD event log= Enabled
Protect the network from malicious rogue access points= Disabled
Rogue DHCP server detection= Enabled
ruckus(config-wips)# temp-block-auth-failed-client time 30
The command was executed successfully.
ruckus(config-wips)# rogue-report all
The command was executed successfully.
ruckus(config-wips)# rogue-report malicious same-network
The command was executed successfully.
ruckus(config-wips)# rogue-dhcp-detection
The command was executed successfully.
ruckus(config-wips)# no rogue-dhcp-detection
The command was executed successfully.
ruckus(config-wips)# no rogue-report
The command was executed successfully.
ruckus(config-wips)# show
Protect my wireless network against excessive wireless requests= Disabled
Temporarily block wireless clients with repeated authentication failures:
Status= Enabled
Time= 30 seconds
Report rogue devices in ZD event log= Disabled
Protect the network from malicious rogue access points= Disabled
Rogue DHCP server detection= Disabled
ruckus(config-wips)#