upload-debug
To configure upload debug file settings, use the following command:
Syntax Description
| abort | Exits the config-upload-debug context without saving changes. |
| end | Saves changes, and then exits the config-upload-debug context. |
| exit | Saves changes, and then exits the config-upload-debug context. |
| quit | Exits the config-upload-debug context without saving changes. |
| show | Shows upload debug file settings. |
| enable | Enables the upload debug file. |
| proto <tftp or ftp> | Sets the protocal for upload debug file. |
| host <WORD> | Sets the host for upload debug file. |
| port <NUMBER> | Sets the port for upload debug file. |
| ftp-user <WORD> | Sets the FTP username for upload debug file. |
| ftp-pass <WORD> | Sets the FTP password for upload debug file. |
Defaults
Disabled.
Example
ruckus(config-upload-debug)# help Shows available commands. history Shows a list of previously run commands. abort Exits the config-upload-debug context without saving changes. end Saves changes, and then exits the config-upload-debug context. exit Saves changes, and then exits the config-upload-debug context. quit Exits the config-upload-debug context without saving changes. show Shows upload debug file settings. enable Enables the upload debug file. proto <tftp or ftp> Sets the protocal for upload debug file. host <WORD> Sets the host for upload debug file. port <NUMBER> Sets the port for upload debug file. ftp-user <WORD> Sets the FTP username for upload debug file. ftp-pass <WORD> Sets the FTP password for upload debug file. ruckus(config-upload-debug)# enable ruckus(config-upload-debug)# proto tftp ruckus(config-upload-debug)# host 192.168.40.11 ruckus(config-upload-debug)# port 443 ruckus(config-upload-debug)# ftp-user user1 ruckus(config-upload-debug)# ftp-pass password1234 ruckus(config-upload-debug)# show Upload Debug: Status= Enabled Protocal= TFTP Host = 192.168.40.11 ruckus(config-upload-debug)# end The upload debug file settings have been updated. Your changes have been saved. ruckus(config)#