lan member
To set the LAN port VLAN membership (only General ports have configurable membership; Trunk ports are members of all VLANs, and Access port membership must be the same as the Untag VLAN), use the following command:
Syntax Description
Defaults
1
Example
ruckus(config-apgrp-port)# lan 2 uplink general ruckus(config-apgrp-port)# lan 2 member 1-10,100,200 ruckus(config-apgrp-port)# show PORTS: LAN ID: 1: Enable LAN = Yes LAN Type= trunk Untag ID= 1 Members= 1-4094 802.1X= disabled DHCP opt82= Disabled LAN ID: 2: Enable LAN = Yes LAN Type= general Untag ID= 20 Members= 1-10,100,200 802.1X= disabled DHCP opt82= Disabled ruckus(config-apgrp-port)#