background-scan

To enable background scanning and configure the scan interval, use the following command:

background-scan [ radio-2.4-interval | radio-5-interval ] <NUMBER>

Syntax Description

background-scan
Enable background scanning and configure the scan interval
radio-2.4-interval <NUMBER>
Configure background scanning interval for the 2.4 GHz radio
radio-5-interval <NUMBER>
Configure background scanning interval for the 5 GHz radio
low-threshold <NUMBER>
Set the min threshold of switch channel in 2.4 GHz radio (Range: 0 ~ 2000)

Defaults

20 seconds

Example

ruckus(config-services)# background-scan radio-2.4-interval 6
The command was executed successfully.