gateway-mode

Use the following command to configure the dual WAN ports for the Unleashed gateway.

gateway-mode

Syntax Description

help
Shows available commands.
history
Shows a list of previously run commands.
abort
Exits the config-sys-gateway context without saving changes.
end
Save changes, and then exits the config-sys-gateway context.
exit
Save changes, and then exits the config-sys-gateway context.
quit
Exits the config-sys-gateway context without saving changes.
no
Contains commands that can be executed from within the context.
wan-port WORD
Sets the port number for primary WAN port.
standby-wan-port WORD
Sets the port number for standby WAN port.
show
Displays the settings in gateway mode.

Example

ruckus(config)# system
ruckus(config-sys)# gateway-mode

    // show port info
    wan-port 1
ruckus(config-sys-gateway-wan):
            ip mode: dhcp
                  dhcp   static pppoe 
            ip addr <IPADDR> <NETMASK> 
            ip route gateway <GWADDR> 
            ip name-server {DNSADDR} [{DNSADDR2}] 
            pppoe user-name <username> password <password>
                     
            lan ip addr <IPADDR> <NETMASK>
            lan ip name-server <DNS-ADDR> <DNS-ADDR>  
            lan ip-range <IPADDR> <IPADDR> 
            lan lease-time: 6-hours|12-hours|1-day|2-days|1-week|2-weeks;
            
            show
ruckus(config-sys-gateway):
    // show port info
    standby-wan-port 2:
    no standby-wan-port:
    
ruckus(config-sys-gateway-standby-wan):
       ip mode: dhcp
                dhcp static 
       ip addr <IPADDR> <NETMASK> gateway <GWADDR> 
         ip name-server {DNSADDR} [{DNSADDR2}]
ruckus(config-sys-gateway)#