show
To display the current service settings, use the following command:
Syntax Description
Defaults
None.
Example
ruckus(config-services)# show
Services:
Automatically adjust ap radio power= Disabled
Automatically adjust ap channel= Enabled
Channelfly works on 2.4GHz radio:
Status= Disabled
Channelfly works on 5GHz radio:
Status= Disabled
Run a background scan on 2.4GHz radio:
Status= Enabled
Time= 2000 seconds
Run a background scan on 5GHz radio:
Status= Enabled
Time= 2000 seconds
AeroScout RFID tag detection= Disabled
Tunnel encryption for tunneled traffic= Disabled
Block multicast traffic from network to tunnel= Block non well-known
Block broadcast traffic from network to tunnel except ARP and DHCP= Disabled
Tunnel Proxy ARP of tunnel WLAN:
status= Disabled
ageing time= 0
Packet Inspection Filter(PIF) uplink process= Disabled
Packet Inspection Filter(PIF) rate limit:
status= Disabled
ruckus(config-services)#