To configure the SNMPv2 settings, use the following command:
snmpv2
Executing this command enters the config-sys-snmpv2 context.
Syntax Description
- snmpv2
- Configure the SNMPv2 settings
- abort
- Exits the config-sys-snmpv2 context without saving changes.
- end
- Saves changes, and then exits the config-sys-snmpv2 context.
- exit
- Saves changes, and then exits the config-sys-snmpv2 context.
- quit
- Exits the config-sys-snmpv2 context without saving changes.
- no access-v3
- Disables special MIB node for customer's kt.
- access-v3
- Enables special MIB node for customer's kt.
- contact WORD
- Enables SNMPV2 agent and sets the system contact.
- location WORD
- Enables SNMPV2 agent and sets the system location.
- ro-community WORD
- Enables SNMPV2 agent and sets the RO community name.
- rw-community WORD
- Enables SNMPV2 agent and sets the RW community name.
- show
- Displays SNMPV2 agent and SNMP trap settings.
Defaults
SNMP Agent:
Status= Enabled
Contact= https://support.ruckuswireless.com/contact_us
Location= 350 West Java Dr. Sunnyvale, CA 94089 US
RO Community= public
RW Community= private
SNMP Trap:
Format= Version2
Status= Disabled
Support-access-V3:
Status= Disabled
Example
ruckus(config-sys)# snmpv2
ruckus(config-sys-snmpv2)#