remote_ap_cli

Use the remote_ap_cli command to access an AP remotely and execute AP CLI commands.

remote_ap_cli [ -q ] {-a ap_mac | -A } "cmd arg1 arg2 .."

Syntax Description

remote_ap_cli
Execute CLI commands in a remote AP
-q
Do not display results
-a
Specify AP by MAC address
ap_mac
The AP’s MAC address
-A
All connected APs
cmd
AP CLI command
arg
AP CLI command argument

Example

ruckus(debug)# remote_ap_cli -A "get director"
---- Command 'rkscli -c "get director "' executed at c0:c5:20:3b:91:f0
------ ZoneDirector Info ------
Primary Controller   : n/a
Secondary Controller : n/a
DHCP Opt43 Code      : 3

The information of the most recent Zone Director:
  [1] 192.168.40.100

  AP is under management of ZoneDirector: 192.168.40.100 / c0:c5:20:18:97:c1,
  Currently AP is in state: RUN
OK
---- Command 'rkscli -c "get director "' executed at c4:10:8a:1f:d1:f0
------ ZoneDirector Info ------
Primary Controller   : n/a
Secondary Controller : n/a
DHCP Opt43 Code      : 3

The information of the most recent Zone Director:
  [1] 192.168.40.100

  AP is under management of ZoneDirector: 192.168.40.100 / c0:c5:20:18:97:c1,
  Currently AP is in state: RUN
OK
---- Command Execution Summary:
         success: 2
         failure: 0
           total: 2
ruckus(debug)#