port-setting

To modify model-specific port settings for all APs of the specified model within the AP group, use the following command:
model<WORD>port-setting

Syntax Description

port-setting
Enters the port-setting context.
no port-setting
Disables the override of the global AP mode configuration.
help
Shows available commands.
history
Shows a list of previously run commands.
abort
Exits the config-apgrp-port context without saving changes.
end
Saves changes, and then exits the config-apgrp-port context.
exit
Saves changes, and then exits the config-apgrp-port context.
quit
Exits the config-apgrp-port context without saving changes.
show
Displays config-apgrp-port context.
lan NUMBER
Enables the AP Ethernet port.
lan NUMBER uplink WORD
Sets the AP port to use the specified type (trunk, access or general).
lan NUMBER rate-uplink NUMBER
Sets the uplink rate limiting for the port (0-1000).
lan NUMBER rate-downlink NUMBER
Sets the downlink rate limiting for the port (0-1000).
lan NUMBER untag NUMBER
Sets the AP port to use the specified VLAN ID(1-4094).
lan NUMBER member NUMBER
Sets the AP port to use the specified members(1-4094).
lan NUMBER opt82 enabled
Enables the AP port DHCP option 82 settings.
lan NUMBER opt82 disabled
Disables the AP port DHCP option 82 settings.
lan NUMBER tunnel disabled
Disables the AP port tunnel settings.
lan NUMBER tunnel enabled
Enables the AP port tunnel settings.
lan NUMBER dot1x disabled
Disables the AP port 802.1X settings.
lan NUMBER dot1x supplicant
Sets the AP port to 802.1X supplicant.
lan NUMBER dot1x auth-port-based
Sets the AP port to port-based 802.1X.
lan NUMBER dot1x auth-mac-based
Sets the AP port to mac-based 802.1X.
lan NUMBER guest-vlan WORD
Sets the AP port to use the specified guest VLAN ID(1-4094).
lan NUMBER dvlan enabled
Enables the AP port dynamic VLAN settings.
lan NUMBER dvlan disabled
Disables the AP port dynamic VLAN settings.
lan NUMBER qos mld-snooping
Enables the AP port MLD Snooping setting.
lan NUMBER qos igmp-snooping
Enables the AP port IGMP Snooping setting.
lan NUMBER qos directed-mcast
Enables the AP port Directed Multicast setting.
dot1x supplicant mac
Sets the username and password to use AP MAC address for AP 802.1X supplicant.
dot1x supplicant user-name WORD
Sets the username for AP 802.1X supplicant.
dot1x supplicant user-name WORD password WORD
Sets the password for AP 802.1X supplicant.
dot1x authsvr WORD
Sets the authentication server for AP 802.1X.
dot1x acctsvr WORD
Sets the accounting server for AP 802.1X.
dot1x mac-auth-bypass
Enables MAC authentication bypass (Use device MAC address as username and password).
no lan NUMBER
Disables the AP Ethernet port.
no dot1x authsvr
Disables the auth server settings.
no lan NUMBER qos mld-snooping
Disables the AP port MLD Snooping setting.
no lan NUMBER qos igmp-snooping
Disables the AP port IGMP snooping setting.
no lan NUMBER qos directed-mcast
Disables the AP port Directed Multicast setting.
no dot1x authsvr
Disables the authentication server settings.
no dot1x acctsvr
Disables the accounting server settings.
no dot1x mac-auth-bypass
Disables the MAC authentication bypass.

Example

ruckus(config-apgrp)# model zf7372 port-setting
ruckus(config-apgrp-port)# show
PORTS:
    LAN ID:
          1:
            Enable LAN = Yes
            LAN Type= trunk
            Untag ID= 1
            Members= 1-4094
            Guest VLAN=
            Enable Dynamic VLAN= Disabled
            802.1X= disabled
            DHCP opt82= Disabled
            Tunnel= Disabled
            MLD Snooping= Disabled
            IGMP Snooping= Enabled
          2:
            Enable LAN = Yes
            LAN Type= trunk
            Untag ID= 1
            Members= 1-4094
            Guest VLAN=
            Enable Dynamic VLAN= Disabled
            802.1X= disabled
            DHCP opt82= Disabled
            Tunnel= Disabled
            MLD Snooping= Disabled
            IGMP Snooping= Enabled

ruckus(config-apgrp-port)#