model
To configure model-specific settings for all APs of a certain model within an AP group, use the following command:
Syntax Description
- port-setting
- Configures the port setting for the specified AP model. Enters config-apgrp-port context.
See
port-settingfor more information. - cband-channels
- Configures the C-band (5.8 GHz) channels for the specified AP model (enable, disable). (UK country code only)
Defaults
Status LEDs: Enabled
PoE Out: Disabled
USB Software: Disabled
Internal Heater: Disabled
C-band channels: Disabled
C-band license: Disabled
LACP status: Disabled
Power mode: Varies by AP model
USB Ports: Enabled
Power Mode: Default
802.3af-txchain: Varies by AP model
Example
ruckus(config-apgrp)# model R610 status-leds enable ruckus(config-apgrp)# end The AP group 'System Default' has been updated. Your changes have been saved. ruckus(config)#