no model

To disable model-specific settings for all APs of a certain model within an AP group, use the following command:

no model <WORD> <arguments>

Syntax Description

no model
Disable AP group model-specific override settings.
<WORD>
Enter the AP model name (e.g., r500, r600, r700, r710, r720, r510, r610, t710, t710s, t300, t300e, t301n, t301s, h510, r310, c110, t610, t610s, t310d, h320, t310c, t310n, t310s, e510, r730, r320).
status-leds-override
Disables the override of the status LEDs for the specified AP model.
usb-port-override
Disables the override of the USB port settings for the specified AP model.
radio-band-override
Disables the override of the radio band for this specified ap model.
usb-software-override
Disables the override of the USB software settings for the specified AP model.
poe-out-override
Disables the override of the PoE out port for this specified ap model.
internal-heater-override
Disables the override of the internal heater for this specified ap model.
cband-channels-override
Disables the override of the 5.8GHz Channels for this specified ap model.
cband-license-override
Disables the override of the 5.8GHz Channels license for this specified ap model.
external-antenna-override
Disables the override of external antenna settings for this specified ap model.
lacp-status-override
Disables the override of the status LACP for this specified ap model.
power-mode-override
Disables the override of the PoE mode for this specified ap model.
802.3af-txchain-override
Disables the override of the 2.4GHz radio transmit chains in 802.3af PoE mode for this specified ap model.

Defaults

Status LEDs: Enabled

USB Software: Disabled

Internal Heater: Disabled

C-band channels: Disabled

C-band license: Disabled

LACP status: Disabled

Power mode: Varies by AP model

USB Ports: Enabled

Power Mode: Default

802.3af-txchain: Varies by AP model

Example

ruckus(config-apgrp)# no model R610 status-leds-override
ruckus(config-apgrp)# end
The AP group 'apgroup2' has been updated.
Your changes have been saved.
ruckus(config)#