auth-server name mac-bypass

To enable MAC authentication bypass (no redirection) and use password as authentication password, use the following command:

auth-server name WORD mac-bypass [ mac | password WORD ]

Syntax Description

auth-server name
Set an external authentication server for hotspot users
WORD
Authentication server name
mac-bypass
Enable MAC auth bypass
mac
Enables MAC authentication bypass (no redirection) and use device MAC address as authentication password.
password WORD
Enables MAC authentication bypass (no redirection) and use password as authentication password.
mac-in-dot1x
Use device MAC address as authentication password and enable to send username and password in 802.1X format of 00-10-A4-23-19-C0 (by default 0010a42319c0).
password-in-dot1x WORD
Use password as authentication password and enable to send username and password in 802.1X format of 00-10-A4-23-19-C0 (by default 0010a42319c0).

Defaults

None.

Example

ruckus(config-hotspot)# auth-server name radius1 mac-bypass mac
The command was executed successfully. To save the changes, type 'end' or 'exit'.
ruckus(config-hotspot)#