show ap all
To display a summary of all devices that have been approved, use the following command:
Syntax Description
Defaults
None.
Example
ruckus# show ap all
AP:
ID:
1:
MAC Address= d4:c1:9e:35:c9:40
Model= r610
Approved= Yes
Device Name= Ruckus-Unleashed
Device Role= Master
Description=
Location=
GPS=
CERT = Normal
Bonjour-policy=
Bonjour-fencing=
Group Name= System Default
Channel Range:
A/N= 36,40,44,48,149,153,157,161 (Disallowed= )
B/G/N= 1,2,3,4,5,6,7,8,9,10,11 (Disallowed= )
Radio a/n:
Channelization= Auto
Channel= Auto
WLAN Services enabled= Yes
Tx. Power= Auto
WLAN Group Name= Default
Call Admission Control= OFF
Protection Mode= Auto
Radio b/g/n:
Channelization= Auto
Channel= Auto
WLAN Services enabled= Yes
Tx. Power= Auto
WLAN Group Name= Default
Call Admission Control= OFF
Protection Mode= 2
Override global ap-model port configuration= No
Network Setting:
Protocol mode= IPv4-Only
Device IP Settings= DHCP
IP Address= 192.168.0.13
Netmask= 255.255.255.0
Gateway= 192.168.0.1
Primary DNS Server= 66.90.130.101
Secondary DNS Server= 216.82.201.11
Mesh:
Status= Disabled
LLDP:
Status = Use Parent Setting
LAN Port:
0:
Interface= eth0
Dot1x= None
LogicalLink= Up
PhysicalLink= Up 1000Mbps full
Label= 10/100/1000 PoE Port1
1:
Interface= eth1
Dot1x= None
LogicalLink= Down
PhysicalLink= Down
Label= 10/100/1000 Port2
PoE Mode= Auto
802.3af PoE Tx. chain= 2
ruckus#