channelflyoff
The ChannelFly override setting allows APs to disable ChannelFly if the AP’s uptime is higher than the specified value (in minutes). To enable the ChannelFly override feature for the AP group, use the following command:
Defaults
Disabled
30 minutes
Example
ruckus(config-apgrp)# channelflyoff 30
ruckus(config-apgrp)# show
APGROUP:
ID:
:
Name= apgroup2
Description=
Channel Range:
B/G/N= 1,2,3,4,5,6,7,8,9,10,11 (Disallowed= )
A/N Indoor= 36,40,44,48,149,153,157,161 (Disallowed= )
A/N Outdoor= 36,40,44,48,149,153,157,161 (Disallowed= )
Radio 11bgn:
Channelization= Auto
Channel= Auto
Tx. Power= Auto
11N only Mode= Auto
WLAN Group= Default
Call Admission Control= OFF
SpectraLink Compatibility= Disabled
Radio 11an:
Channelization= Auto
Indoor Channel= Auto
Outdoor Channel= Auto
Tx. Power= Auto
11N only Mode= Auto
WLAN Group= Default
Call Admission Control= OFF
SpectraLink Compatibility= Disabled
Network Setting:
Protocol mode= Use Parent Setting
Turn off channfly setting: enabled
if AP's uptime is more than 30 minutes will turn off AP's ChannelFly
Members:
ruckus(config-apgrp)#