aaa

Use the following command to configure an AAA server entry and enter the config-aaa context:

aaa WORD

Syntax Description

abort
Exits the config-aaa context without saving changes.
end
Saves changes, and then exits the config-aaa context.
exit
Saves changes, and then exits the config-aaa context.
quit
Exits the config-aaa context without saving changes.
name WORD
Sets the AAA server name.
show
Displays a list of available AAA servers.
CaseSensitive
Sets the ‘CaseSentitive’ value of AD/LDAP server to ‘enabled’.
type
Sets the type of AAA server.
type ad
Sets the AAA server type to 'Active Directory'.
type ldap
Sets the AAA server type to 'LDAP'.
type ad-802.1x
Sets the AAA server type to 'Active Directory For 802.1x '.
type radius-auth
Sets the AAA server type to 'RADIUS'.
type tacplus-auth
Sets the AAA server type to 'TACPLUS'.
type radius-acct
Sets the AAA server type to 'RADIUS Accounting'.
radius-encryption
Sets the AAA server encryption type.
radius-encryption tls
Sets the AAA server encryption type to 'TLS'.
auth-method pap
Sets the authentication method to PAP.
auth-method chap
Sets the authentication method to CHAP.
ip-addr IP-ADDR
Sets the AAA server's IP/IPv6 address.
port PORT-NUM
Sets the AAA server's port.
tacplus-service WORD
Sets TACPLUS service name with length (1-64 bytes).
domain-name WORD
Sets the windows/base domain name.
domainServer-deviceNameWORD
Sets the domain server device name.
no radius-encryption
Disables the AAA server encryption.
no ad-global-catalog
Disables global catalog support.
no grp-search
Disables group attribute lookup support.
no encryption-TLS
Disable the TLS Encryption
no backup
Disables the backup function.
ad-global-catalog
Enables global catalog support.
grp-search
Enables group attribute lookup support.
admin-dn WORD
Sets the admin domain name.
admin-password WORD
Sets the admin password.
key-attribute WORD
Sets the LDAP key attribute.
search-filter WORD
Sets the LDAP search filter.
radius-secret WORD
Sets the AAA server's shared secret.
tacplus-secret WORD
Sets the TACPLUS server's shared secret.
encryption-TLS
Enables the TLS Encryption
backup
Enables the backup function.
backup-ip-addr IP-ADDR
Sets the backup AAA server's IP/IPv6 address.
backup-port PORT-NUM
Sets the backup AAA server's port.
backup-radius-secret WORD
Sets the backup AAA server's shared secret.
request-timeout NUMBER
Sets the failover request timeout (2~20 seconds).
retry-count NUMBER
Sets the failover retry count (2~10 times).
consecutive-drop-packet NUMBER
Sets the number of consecutive dropped packet (range:1~10 , default is 1).
reconnect-primary-interval NUMBER
Sets the failover re-connect to primary interval (1~86400 minutes).

Example

ruckus(config)# aaa activedir
The AAA server 'activedir' has been created. To save the AAA server, type 'end' or 'exit'.
ruckus(config-aaa)# type ad
The command was executed successfully. To save the changes, type 'end' or 'exit'.
ruckus(config-aaa)# ip-addr 192.168.10.40
The command was executed successfully. To save the changes, type 'end' or 'exit'.
ruckus(config-aaa)# show
AAA:
  ID:
    :
      Name= activedir
      Type= Active Directory
      IP Address= 192.168.10.40
      Port= 389
      Windows Domain Name=
      Global Catalog= Disabled
      Admin DN=
      Admin Password=
      Group Search= Enabled
      encryption-TLS = Disabled

ruckus(config-aaa)# end
The AAA server 'activedir' has been updated and saved.
Your changes have been saved.
ruckus(config)#