Tunnel and Data Plane Licenses

This section describes licensing for SmartZone tunneling and Data Plane features, covering standard licenses, default trials, platform differences, and usage scope. Features include RUCKUS GRE, SoftGRE, Split Tunnel, vSZ‑D capacity, NAT, DHCP, Flexi‑VPN, and L3 Roaming.

Tunnel and Data Plane Licenses

Data Plane Licenses

Available Data Plane licenses are as follows:
  • Support License for Data Plane: Like the Support Licenses for APs and controllers, each Data Plane instance requires a Support License. This license enables software upgrades and assistance from RUCKUS Support for the vSZ-D and SZ144-D platforms.
  • Data Plane Capacity License: Onboarding an external Data Plane (vSZ-D or SZ144-D) to function with virtual SmartZone controllers requires one license for each data plane in the controller. By default, you receive 10 data plane capacity licenses for three months. After this period, the data plane instances will enter an error state until you purchase and activate permanent licenses.
  • Data Plane DHCP: Enable DHCP features in the Data Plane after you activate the license. By default, you receive one DHCP license for 90 days (3 months). Each DHCP license supports 1,000 IP address leases. Assign DP DHCP licenses to the data plane instances that require these services. Only DP instances with an assigned license can utilize these features.

    To assign DHCP licenses to a DP instance, navigate to Administration > Licenses > DP DHCP/NAT Licenses Assignment. Use the Create option to bind the available licenses to the desired DP instances (the associated DHCP profiles must be created separately) or use the Wizard option to perform both license assignment and profile configuration.

      Note:
    • The Create button is grayed out when no licenses are available.
    • You can assign one DHCP license to a maximum of two data plane instances that belong to the same DP Group.
    • For detailed instructions on creating these profiles, refer to Working with DHCP and NAT.

  • Data Plane NAT: Enable NAT features in the Data Plane after you activate the licenses. By default, you receive one NAT license for 90 days (3 months). Each NAT license supports 100,000 NAT sessions. Assign DP NAT licenses to the data plane instances that require these services. Only DP instances with an assigned license can utilize these features.

    To assign NAT licenses to a DP instance, navigate to Administration > Licenses > DP DHCP/NAT Licenses Assignment. Use the Create option to bind the available licenses to the desired DP instances (the associated NAT profiles must be created separately) or use the Wizard option to perform both license assignment and profile configuration.

      Note:
    • The Create button is grayed out when no licenses are available.
    • You can assign one NAT license to only one DP instance.
    • For detailed instructions on creating these profiles, refer to Working with DHCP and NAT.

  • Data Plane Bandwidth: By default, your vSZ-D license provides your Data Plane with 1 Gbps throughput capacity (bandwidth). The Data Plane bandwidth license increases the uplink bandwidth for the vSZ-D. You can assign a bandwidth license to an approved data plane. You can configure each DP with only one bandwidth license. The following licensing options are available:
    • 10 Gbps - Upgrade to this option for a maximum throughput in the uplink of 10 Gbps. This requires a 10 Gbps NIC on your host machine.
    • Unlimited - This add-on license includes unlimited throughput capacity in the uplink of the data plane. This requires a 40 Gbps NIC on your host machine.
    Attention: Configuring a bandwidth license applies exclusively to virtual platforms.
    To assign a bandwidth license to your vSZ-D, in the controller web UI select Administration > Licenses > DP Bandwidth License Configuration. Select a DP from the list and select the Bandwidth from the drop-down menu. Click OK.

Tunnel Licenses

Available tunnel licenses are as follows:

Note: RUCKUS GRE tunnels from the APs to the Data Plane do not require a license. Additional features such as SoftGRE or Split Tunnel require separate licenses.

  • SoftGRE Tunnel (AP Direct Tunnel): SoftGRE enables tunneling of client traffic from access points to a third‑party gateway using GRE encapsulation. A SoftGRE license is required for each access point configured for SoftGRE tunneling.

    For information about configuring different tunnel profiles, refer to Working with Tunnel Profiles.

    Note: SoftGRE Tunnels are distinct from standard RUCKUS GRE Tunnels (no license required) and Split Tunnels (Split Tunnel license required). Assign the license type that matches the configured tunneling behavior in the AP or Zone.
  • Split Tunnel: Split Tunnel allows an access point to forward corporate traffic through the GRE tunnel while locally breaking out non‑corporate traffic to reduce WAN usage and latency. A Split Tunnel license is required for each access point using this feature.

    For information about configuring different tunnel profiles, refer to Working with Tunnel Profiles.

    Note: Split Tunnels are distinct from standard RUCKUS GRE Tunnels (no license required) and SoftGRE Tunnels (SoftGRE Tunnel license required). Assign the license type that matches the configured tunneling behavior in the AP or Zone.
  • Flexi-VPN: By choosing the network peers towards which APs can form the VPN tunnels, Flexi-VPN allows you to customize the network topology and is thereby able to control the network resources accessible to the end-user. Only vSZ-E and vSZ-H support this feature and it is enabled by purchasing the Flexi-VPN license. By default, you get one Flexi-VPN trial license for 90 days (about 3 months). Beyond 90 days, purchase the permanent license to enable the feature in all access points, as necessary for your deployment.

    For information about configuring Flexi-VPN, refer to Enabling Flexi-VPN.

    Note: A minimum of two data planes must be present for this feature to function. Activate Flexi-VPN by assigning a Flexi-VPN profile to a WLAN.
  • L3 Roaming: L3 Roaming preserves a client’s IP address and session continuity by dynamically creating tunnels between Data Planes to anchor traffic to the client’s home Data Plane when roaming across different Layer 3 subnets. By default, you get one L3 Roaming license for 90 days (about 3 months). Beyond 90 days, purchase the permanent license.

    For information about configuring L3 Roaming, refer to Enabling L3 Roaming.

    Note: A minimum of two data planes must be present for this feature to function. One license is required per cluster; for example, if you have six data planes spread across four clusters, you will need four licenses.

Standard Licensing and Default Trial Allocations

Licenses and Usage Scope for Tunneling Features and Data Plane Services and Trial Licenses Scope and Duration for Tunneling Features and Data Plane Services present standard licensing and the default trial allocations for SmartZone tunneling features and Data Plane services.

Licenses and Usage Scope for Tunneling Features and Data Plane Services

Feature / License Type License ID Usage Scope
SoftGRE (AP Direct Tunnel) CAPACITY‑RXGW One license for each access point configured for SoftGRE tunneling
Split Tunnel CAPACITY‑SPTN One license for each access point using Split Tunnel
Data Plane NAT CAPACITY‑DP‑SNAT One license for each Data Plane enabling NAT (supports up to 100,000 NAT sessions per license)
Data Plane DHCP CAPACITY‑DP‑SVDS One license for each Data Plane enabling DHCP or a maximum two DPs of the same DP group (supports up to 1,000 DHCP leases per license)
vSZ‑D Capacity CAPACITY‑VSZD One license for each vSZ‑D instance onboarded
Flexi‑VPN FEATURE‑FLEXIVPN One license for each controller enabling Flexi‑VPN
L3 Roaming FEATURE‑SVL3 One license for each Data Plane that participates in L3 Roaming

Trial Licenses Scope and Duration for Tunneling Features and Data Plane Services

Feature / License Type vSZ Default Trial SZ144 Default Trial
SoftGRE (AP Direct Tunnel) 5 licenses, 90 days 1 license, 90 days
Split Tunnel 5 licenses, 90 days 1 license, 90 days
Data Plane NAT 1 license, 90 days (supports 100,000 NAT sessions) Not applicable (SZ144 does not support NAT in the Data Plane)
Data Plane DHCP 1 license, 90 days (supports 1,000 DHCP leases) Not applicable (SZ144 does not support DHCP in the Data Plane)
vSZ‑D Capacity 10 licenses, 90 days Not applicable (SZ144 does not support external DPs)
Flexi‑VPN 1 license, 90 days Not applicable (SZ144 does not support Flexi-VPN in the Data Plane)
L3 Roaming 1 license, 90 days Not applicable (SZ144 does not support L3 Roaming in the Data Plane)