Deploying the vSZ-D
In this section:
- Supported HypervisorsvSZ-D can be installed only on specific ESXi and KVM versions.
- Hardware RequirementsvSZ-D supports auto scaling, which means the number of CPU cores can be expanded without needing a software update. RUCKUS recommends from three to six CPU core allocations for the vSZ-D.
- Supported Modes of Operation
- NIC Settings
- Recommended NICs and Operation ModesThe following table lists the modes of operation and network interface cards (NICs) that have been tested by RUCKUS. Other NICs that support Intel DPDK architectures may or may not work.
- vSZ-D Logical InterfacesThe Virtual SmartZone Data Plane (vSZ-D) uses two distinct logical interfaces to separate control-plane traffic from data-plane traffic. This separation is critical for stability and performance because management operations must remain unaffected by high-volume user data flows.
- Scaling Considerations
- Performance RecommendationsThe vSZ‑D, SZ100‑D, and SZ144‑D platforms are designed to minimize latency during user data aggregation and forwarding. Their architecture enables consistent packet performance with minimal throughput degradation as the number of tunnels or clients increases. Fast‑path processing is optimized to scale with the underlying NIC capacity, whether 1 GbE, 10 GbE, or higher. These platforms are engineered to handle large numbers of data tunnels and maintain high forwarding performance.