Flexi-VPN
Feature Overview
The Flexi-VPN feature enables secure, flexible tunneling of wireless client traffic between two Data Plane appliances. When configured, Flexi-VPN determines how traffic is forwarded across distributed network sites, allowing you to control traffic isolation, centralized management, and seamless Layer 3 roaming for specific SSIDs or VLANs. Unlike traditional static VPNs, Flexi-VPN dynamically creates and tears down these tunnels as clients move or as network policies change, ensuring that only the necessary connections exist at any given time. This reduces manual configuration, optimizes resource usage, and supports seamless client mobility across geographically separated locations, making it ideal for large enterprises or service providers with distributed campuses.
Requirements
Considerations
Consider the following when configuring and using Flexi-VPN:
Limitations
Consider the following limitations when enabling Flexi-VPN in a WLAN:
- Advanced VLAN features are not supported with Flexi-VPN (VLAN Pooling, Dynamic VLAN, Core network VLAN, and DP tunnel NAT).
- Flexi-VPN is only supported with RUCKUS GRE tunnels. If a SoftGRE tunnel is selected for a WLAN, the Flexi-VPN feature is not available to that WLAN.
- Flexi-VPN is only supported when the core network forwarding rule is set to Bridge in the WLAN. If the core network forwarding rule is set to L2oGRE, the Flexi-VPN feature is not available to that WLAN.
- Flexi-VPN is not supported if NAT service is enabled in the WLAN.
Best Practices
Prerequisites
-
Purchase and activate the Flexi-VPN add-on license before enabling the feature.
-
Confirm that DHCP/NAT or DHCP Relay configurations are compatible with Flexi-VPN deployment.
-
Obtain necessary network information (for example, VLAN IDs, SSID mappings, tunnel endpoints) prior to configuration.
-
If integrating with L3 Roaming or CALEA, review their configuration requirements to avoid conflicts.