Forwarding Multicast Packets

The Multicast Forwarding parameter enables forwarding of multicast packets in Data Plane tunnel mode.
Attention: When enabled, Data Plane tunnel WLANs do not support IPv6 or Client Isolation.
Complete the following steps to globally enable multicast packet forwarding in tunnel mode.
  1. In the controller web UI, select Services > Tunnels & Ports > Multicast Forwarding.
    The Multicast Forwarding tab is displayed.
  2. Under Global Setting, set Enable forwarding multicast packet on tunnel mode to ON. By default the setting is set to OFF.
  3. Click OK to save the setting or Cancel to revert to the current configuration.
    You have enabled forwarding of multicast packets through the tunnel.