snmp-server user
snmp-server user
user-name
group-name
v3
[
auth
{ md5 | sha |
sha512 | sha384
|sha256| sha224 }
auth-password
[ priv
{ aes | des }
password-string ] ]no snmp-server user
user-name
group-name
v3
[
auth
{ md5 | sha | sha512 | sha384 |sha256| sha224
}
auth-password
[ priv
{ aes | des
}
password-string ] ]SNMP users are not configured.
Global configuration mode
The
snmp-server user command creates an SNMP user, defines the group to which the user will be associated,
defines the type of authentication to be used for SNMP access by this user, specifies
either the
AES or
DES encryption types used to encrypt the privacy password.
All users must be mapped to an SNMP group. Groups are defined using the
snmp-server group command.
The priv parameter specifies the encryption type (DES or AES) used to encrypt the privacy password. If the encrypted keyword is used, do the following:
- If DES is the privacy protocol to be used, enter des followed by a 16-octet DES key in hexadecimal format for the DES-password-key . If you include the encrypted keyword, enter a password string of at least 8 characters.
- If AES is the privacy protocol to be used, enter aes followed by the AES password key. For a small password key, enter 12 characters. For a big password key, enter 16 characters.
| Release version | Command history |
|---|---|
| 09.0.10e | The command was modified to remove the ACL options. |
| 10.0.10c | The command was modified to include the new keywords. |