multicast mvr

Enables Multicast VLAN Registration (MVR) on a VLAN.
Syntax
multicast mvr { source | receiver }
no multicast mvr { source | receiver }
Command Default

MVR is not enabled by default.

Parameters
source
Configures the VLAN as a source VLAN.
receiver
Configures the VLAN as a receiver VLAN.
Modes

VLAN configuration mode

Usage Guidelines

When you use this command, a VE interface is created if not already configured. The no form of the command does not delete the VE interface. TheVE interface is only deleted when you delete the VLAN or delete the VE interface manually.

The no form of the command disables MVR on a VLAN.

Examples

The following example configures MVR on a VLAN and assigns untagged receiver ports to the MVLAN. 

device(config)# vlan 1
device(config-vlan-1)# multicast mvr source
History
Release version Command history
09.0.10 This command was introduced.
09.0.10a The receiver-port option was deprecated.
Parent topic: Commands M