manager disconnect

Disconnects the ICX device from ICX-Management.
Syntax
manager disconnect
Modes

Privileged EXEC mode

Global configuration mode

Usage Guidelines

When an ICX device is managed from the cloud, RUCKUS recommends that the manager connect and manager disconnect commands be used to connect to and disconnect from ICX-Management. These two commands do not change the running configuration timestamp, which ICX-Management uses to determine whether any configuration changes have been made on the ICX device.

RUCKUS recommends that the manager disconnect command be entered only from the local terminal or using an SSH or a direct Telnet connection (not through the reverse SSH tunnel).

In an on-premises ICX-Management implementation, the manager disconnect command is used to bounce the connection to SmartZone.

Examples

The following example disconnects the ICX device from the ICX-Manager. 

device# manager disconnect
Manager Disconnect initiated…
History
Release version Command history
08.0.80 This command was introduced as sz disconnect.
08.0.92 The command name was changed to manager disconnect. The command function was modified to disconnect ICX devices from the cloud.
09.0.10h The command can also be configured in global configuration mode.
Parent topic: Commands M