show license
Displays information about Self Authenticated Upgrade licenses installed on a device.
Modes
Privileged EXEC mode
Usage Guidelines
The command can be used on a standalone device or on the active controller for a stack.
This command does not display information about XML licenses that were installed on the device in FastIron 08.0.70 or earlier releases.
The
show license
command displays the following information:
| Output field | Description |
|---|---|
| Unit | Unit number assigned in the stack. For standalone units, the unit number is 1. |
| License Name | Name of Software Authenticated Upgrade (SAU) license installed. |
| L3 Premium | (Yes, No) Indicates whether Layer 3 features are enabled by the license. |
| Port Speed Upgrade | (Yes, No) Indicates whether the license allows ports to be upgraded from the default speed (1 Gbps). |
| Speed | Speed to which ports covered by the license can be upgraded (10 Gbps). |
| Ports | Indicates the number of ports covered by the license. |
| MACsec | Indicates whether a MACsec license is installed. |
Examples
The following example shows a 2x10G license installed on stack unit 1. Stack unit 2 has 8x10G and Layer 3 Premium licenses.
ICX7250-24P Router# show license installed Unit License Name L3 Premium Port Speed Upgrade Speed Ports MACsec 1 L3-PREM-2X10G Yes Yes 10G 2 NA 2 L3-PREM-8x10G Yes Yes 10G 8 NA ICX7150-24P Router#
History
| Release version | Command history |
|---|---|
| 08.0.80 | This command was enhanced to support all ICX platforms that support SAU licensing. |
| 08.0.61 | This command was introduced. |