ipv6 route next-hop-recursion
ipv6 route
[
vrf
vrf-name
]
next-hop-recursion
[
number
]
no ipv6 route
[
vrf
vrf-name
]
next-hop-recursion
[
number
]
By default, only the local IPv6 address table is consulted to resolve the next hop toward a static route destination.
Global configuration mode
Before configuring a static IPv6 route, you must enable the forwarding of IPv6 traffic
on the Layer 3 switch using the
ipv6 unicast-routing command and must enable IPv6 on at least one interface by configuring an IPv6 address
or explicitly enabling IPv6 on that interface.
ICX 7150 devices do not support tunnels or VRFs.
The
no form of the command disables IPv6 static route next-hop recursion. If a VRF is configured,
the
no form of the command removes the static IPv6 route configuration from the VRF.