show ip http status

Displays whether HTTP and HTTPS ports are enabled or disabled.
Syntax
show ip http status
Modes

All modes

Usage Guidelines

HTTP and HTTPS ports are enabled by default on most ICX devices. On ICX 7150-C08PT devices, HTTP and HTTPS ports are disabled by default and web management is not supported. However, ICX 7150-C08PT HTTP and HTTPS ports must be enabled as a pre-requisite to web authentication.

Use this command on ICX 7150-CO8PT devices running a FastIron 08.0.92 image to check whether HTTP and HTTPS ports are enabled.

The show ip http status command displays the following information:

Output field Description
HTTP Port status:

Enabled - HTTP ports open

Disabled - HTTP ports closed

HTTPS Port status:

Enabled - HTTPS ports open

Disabled - HTTPS ports closed

Examples

The following example indicates that HTTP and HTTPS ports on the device are open. 

ICX7150-C08PT Switch (config)# show ip http status
HTTP Port status: Enabled
HTTPS Port status: Enabled
History
Release version Command history
08.0.92 This command was introduced.
Parent topic: Show Commands