ip dhcp-server pool

Creates a DHCP server address pool.
Syntax
ip dhcp-server poolname
no ip dhcp-server poolname
Parameters
name
The name of the address pool.
Modes

Global configuration mode

Usage Guidelines

Please confirm
Before using this command, you must configure the subnet network and mask of the DHCP address pool. Refer to the network (DHCP) command for more information.

The no form of this command disables the address pool. Use this command to switch to pool configuration mode (config-dhcp-name# prompt) and create an address pool.

Examples

The following example creates a DHCP address pool. 

device(config)# ip dhcp-server pool cabo

Related commands:

network (DHCP)
Parent topic: Commands I