router vrrp

Globally enables Virtual Router Redundancy Protocol (VRRP).
Syntax
router vrrp
no router vrrp
Command Default

VRRP is not globally enabled.

Modes

Global configuration mode

Usage Guidelines

After globally enabling VRRP, the command prompt does not change. Nearly all subsequent VRRP configuration is performed at the interface level, but VRRP must be enabled globally before configuring VRRP instances.

The no router vrrp command disables VRRP globally.

Note: Only 16 VRRP instances are configurable on the ICX 7150 device.
Examples

The following example globally enables VRRP and enters interface configuration mode. 

device# configure terminal
device(config)# router vrrp
device(config)# interface ethernet 1/1/5
Parent topic: Commands O, P, Q, R, and Sa through Sh