show configuration
Displays the configuration data in the startup configuration file.
Modes
User EXEC mode
Privileged EXEC mode
Global configuration mode
Interface configuration mode
All configuration modes
Examples
The following example is sample output from the
show configuration command.
device# show configuration ! Startup-config data location is flash memory ! Startup configuration: ! ver 08.0.20 ! stack unit 1 module 1 icx7450-24-port-management-module module 2 icx7400-xgf-4port-40g-module module 3 icx7400-qsfp-1port-40g-module module 4 icx7400-qsfp-1port-40g-module ! ! ! ! ! ! ! boot sys fl sec ip address 10.25.224.197 255.255.255.0 dynamic ip dns domain-list englab.ruckus.com ip dns server-address 10.31.2.10 ip default-gateway 10.25.224.1 ! ! ! ! ! ! ! ! ! ! end
The following example is sample output from the
show configuration command for a switch, including dynamically obtained DHCP options.
device> show configuration Startup-config data location is flash memory ! Startup configuration: ! ver 08.0.61b1T211 ! stack unit 1 module 1 icx7250-24-port-management-module module 2 icx7250-sfp-plus-8port-80g-module ! ! vlan 1 name DEFAULT-VLAN by port ! ! ! ! ip address 10.10.10.2 255.255.255.0 dynamic ip dns domain-list ManualDomain.com ip dns domain-list testStaticDomain.com ip dns server-address 20.20.20.8 20.20.20.9 20.20.20.5 ip default-gateway 10.10.10.1 dynamic ! ! ! interface ethernet 1/1/21 disable ! interface ethernet 1/2/2 speed-duplex 1000-full ! interface ethernet 1/2/4 speed-duplex 1000-full ! interface ethernet 1/2/5 speed-duplex 1000-full ! interface ethernet 1/2/6 speed-duplex 1000-full ! interface ethernet 1/2/7 speed-duplex 1000-full ! interface ethernet 1/2/8 speed-duplex 1000-full ! lldp run ! end
The following example is sample output from the
show configuration command for a router, including dynamically obtained DHCP options.
device> show configuration ! Startup-config data location is flash memory ! Startup configuration: ! ver 08.0.61b1T213 ! stack unit 1 module 1 icx7250-24-port-management-module module 2 icx7250-sfp-plus-8port-80g-module ! ! vlan 1 name DEFAULT-VLAN by port ! ! ! ip dns domain-list ManualDomain.com ip dns domain-list testStaticDomain.com ip dns server-address 20.20.20.8 20.20.20.9 20.20.20.5 ip route 0.0.0.0/0 10.10.10.1 distance 254 dynamic ! ! ! interface ethernet 1/1/7 ip address 10.10.10.2 255.255.255.0 dynamic ! interface ethernet 1/1/21 disable ! interface ethernet 1/2/2 speed-duplex 1000-full ! interface ethernet 1/2/4 speed-duplex 1000-full ! interface ethernet 1/2/5 speed-duplex 1000-full ! interface ethernet 1/2/6 speed-duplex 1000-full ! interface ethernet 1/2/7 speed-duplex 1000-full ! interface ethernet 1/2/8 speed-duplex 1000-full ! ! lldp run ! ! end
History
| Release version | Command history |
|---|---|
| 08.0.61 | This command was modified to include information about dynamically obtained DHCP options. |