By default, the port ID subtype to advertise is set to 3.
Parameters
num
Specifies the port ID subtype to advertise. The subtype determines the specific information
that is advertised as the port ID.
1
Causes interface alias information, taken from the ifAlias MIB object, to be advertised
as the port ID.
3
Causes the MAC address to be advertised as the port ID. This is the default value.
5
Causes interface name information, taken from the ifName MIB object, to be advertised
as the port ID.
7
Causes a locally assigned value (as defined by RFC 2863) to be displayed as the port
ID.
RUCKUS devices display information taken from the ifIndex MIB object.
ports
Specifies the LLDP-capable ports for which the LLDP port ID subtype is to be advertised.
all
Causes the advertisement of the port ID subtype for all LLDP-capable ports on the
device.
ethernetunitslot/port
Causes the advertisement of the port ID subtype for a specific Ethernet port. When
immediatly followed by the
to option, this option specifies the first port in a range of Ethernet ports.
tounit/slot/port
Causes the advertisement of the port ID subtype for a range of Ethernet ports and
specifies the last port in the range.
Note: You can specify the advertisement of an LLDP port ID subtype for a range of Ethernet
ports (for example, ethernet 1/1/1 to ethernet 1/1/4), or for a list of Ethernet ports
(for example, ethernet 1/2/1 ethernet 1/2/2), or you can combine a range with a list
(for example, ethernet 1/1/1 to ethernet 1/1/4 ethernet 1/1/1 ethernet 1/1/2).
Modes
Global configuration mode
Usage Guidelines
Note: The port ID subtype to advertise is only configurable on ICX
7450 and ICX 7250 devices.
The LLDP port ID subtype advertises previously configured information. To ensure that
the physical location of a port is available for advertisement when the port ID subtype
to advertise is set to 1, 5, or 7, the port location must first be configured by using
the
lldp med location-id civic-address,
lldp med location-id coordinate-based, or
lldp med location-id ecs-elin command.
You can specify a list of ports, separated by a space, or a range of ports, or you
can combine lists and ranges.
The command cannot support LAG virtual interfaces. Attempting to configure them will
have no effect.
The
no form of the command restores the port ID subtype advertised to the default value
for specific ports.
Examples
The following example shows how to advertise the interface alias (port ID subtype
1) as the port ID for two individual ports (1/2/1 and 1/2/2) and for a range of ports
(1/1/1 to 1/1/4).