copy scp ssl-private-key-file

Downloads a copy of the SSL private key from an SCP host server to the ICX device

Syntax

copy scp
                  ssl-private-key-file

{ scp-hostname | ip-address [ remote-port ] | ipv6 { ipv6-hostname | ipv6-address } } { source-filename }

Parameters

scp-hostname: Specifies the hostname of the SCP host.
ip-address: Specifies the IPv4 address of the SCP host (in the form A.B.C.D).
ipv6 { ipv6-hostname | ipv6-address }: Specifies the IPv6 hostname or IPv6 address of the SCP host.
remote-port: Specifies the remote port number. Valid decimal value is 1 through 65535.
source-filename: Specifies the filename to be copied from the SCP host.

Modes

Privileged Exec Mode

Usage Guidelines

Any usage guidelines? Better samples?

Examples

The following example imports the SSL private key file named sslkeyfile from the SCP server named scpserver1.

device# copy scp ssl-private-key-file scpserver1 sslkeyfile

The following example imports the SSL private key file named sslkeyfile from the server with the IPv6 address 1:2::3:4.

device# copy scp ssl-private-key-file 1:2::3:4 sslkeyfile

History

Release version	Command history
09.0.00	This command was introduced.