show telnet

Displays Telnet connection and configuration details.
Syntax
show telnet[config]
Parameters
config
Displays Telnet configuration information.
Modes

User EXEC mode

Privileged EXEC mode

Global configuration mode

The show telnetconfig command displays the following information:

Output field Description
Telnet Server Telnet server status - enabled or disabled.
Idle timeout The configured idle timeout of the Telnet server.
Login timeout The configured login timeout of the Telnet server.
Login retries The configured number of retries allowed to connect to the Telnet server.
Strict management VRF Strict management VRF is enabled or disabled for the Telnet server.
Authentication The authentication is enabled or disabled for the Telnet server.
suppress-reject-message Whether the connection rejection message is suppressed or not; if a RUCKUS device denies Telnet management access to the device, the software sends a message to the denied Telnet client.
Examples

The following example displays output of the show telnet command showing the Telnet connections and their status. 

device(config)# show telnet

Telnet connections (inbound):
1 		closed
2 		closed
3 		closed
4 		closed
5 		closed
Telnet connection (outbound):
6 		closed

The following example displays output of the show telnet config command showing Telnet configuration details.

Verify correct output for FI 09.0.00.
device(config)# show telnet config
Telnet server                   : Enabled
Idle timeout (minutes)          : 0
Login timeout (minutes)         : 2
Login retries                   : 4
Strict management VRF           : Disabled
Authentication                  : Disabled
Telnet IPv4 clients             : All
Telnet IPv6 clients             : All
The following output is pre-FI 09.0.00. Notice the Telnet access-group entries and the suppress-reject-message output
Parent topic: Show Commands