ipv6 multicast-routing rpf-check mac-movement
Triggers Reverse Path Forwarding (RPF) check on MAC movement for directly connected
sources and sends a MAC address movement notification to the Protocol Independent
Multicast (PIM) module which results in PIM convergence.
Syntax
ipv6 multicast-routing rpf-check mac-movement
no ipv6 multicast-routing rpf-check mac-movement
Command Default
RPF check on MAC movement for directly connected sources is not enabled.
Modes
Global configuration mode
Usage Guidelines
PIM convergence on MAC movement is applicable only in a topology where the multicast source port and PIM routers are in the same Layer 2 domain.
IPv6 PIM Dense mode is not supported for PIM convergence on MAC movement.
The
ipv6 multicast-routing rpf-check mac-movement command is not supported on the
RUCKUS ICX 7250 devices.
The
no
form of the command disables RPF check on MAC movement for directly connected sources.
History