qos scheduler-profile
qos scheduler-profileuser-profile-name{mechanismscheduling-mechanism|profile[qosp0wt0|qosp1wt1|qosp2wt2|qosp3wt3|qosp4wt4|qosp5wt5|qosp6wt6|qosp7wt7]}no qos scheduler-profileuser-profile-nameA user-defined QoS scheduler profile is not configured.
Global configuration mode
The
no form of this command removes the scheduler profile configuration.
You can use the
scheduler-profile command to attach a user scheduler profile to a port. If you want to remove a scheduler-profile
you must ensure that it is not attached to any port.
On ICX 7450 devices, changing the global scheduler and port scheduler on running traffic may cause traffic loss.
The default QoS-profile weights for each queue using a weighted QoS mechanism are as follows:
| Profile | Priority | Weighted bandwidth |
|---|---|---|
| Profile qosp7 | Priority7(Highest) | Bandwidth requested 44% calculated 44% |
| Profile qosp6 | Priority6 | Bandwidth requested 8% calculated 8% |
| Profile qosp5 | Priority5 | Bandwidth requested 8% calculated 8% |
| Profile qosp4 | Priority4 | Bandwidth requested 8% calculated 8% |
| Profile qosp3 | Priority3 | Bandwidth requested 8% calculated 8% |
| Profile qos2 | Priority2 | Bandwidth requested 8% calculated 8% |
| Profile qosp1 | Priority1 | Bandwidth requested 8% calculated 8% |
| Profile qosp0 | Priority0 (Lowest) | Bandwidth requested 8% calculated 8% |
| Per-queue details | Bandwidth percentage |
|---|---|
Class 0 |
3 |
Class 1 |
3 |
Class 2 |
3 |
Class 3 |
3 |
Class 4 |
3 |
Class 5 |
3 |
Class 6 |
7 |
Class 7 |
75 |
The default QoS-profile weights for each queue using a mixed QoS mechanism are as follows:
| Per-queue details | Bandwidth percentage |
|---|---|
Class 0 |
15 |
Class 1 |
15 |
Class 2 |
15 |
Class 3 |
15 |
Class 4 |
15 |
Class 5 |
25 |
Class 6 |
sp |
Class 7 |
sp |
The total weight (wt0-wt7) in both weighted and mixed mechanism must be 100 percent.
The minimum value for any weight is 1.
A maximum of eight scheduler profiles are supported.
The following example configures a QoS scheduler profile named user1, with weighted scheduling, and specify the bandwidth percentage for each QoS class:.
Device(config)# qos scheduler-profile user1 mechanism weighted Device(config)# qos scheduler-profile user1 profile qosp0 1 qosp1 1 qosp2 10 qosp3 10 qosp4 10 qosp5 10 qosp6 20 qosp7 38
The following example configures a QoS scheduler profile named user2, with SP scheduling.
Device(config)# qos scheduler-profile user2 mechanism strict
The following example configures a QoS scheduler profile named user3, with mixed SP and weighted scheduling.
Device(config)# qos scheduler-profile user3 mechanism mixed-sp-wrr
| Release version | Command history |
|---|---|
| 08.0.10 | This command was introduced. |