ptp-clock transparent
ptp-clock transparent pkt-type
ethernet option e2e step-type onestep
no ptp-clock transparent pkt-type
ethernet option e2e step-type onestep
The PTP-TC configuration is disabled by default on all interfaces.
Global configuration mode
Interface configuration mode
The ICX7850-32Q, ICX7150-24(Non PoE) and ICX7150-12P devices support PTP packet prioritization and end to end transparent clock mode.
FastIron 08.0.95 supports the end-to-end PTP-TC mode of operation for standalone and stacking topologies.
The PTP-TC can be enabled globally. All the ports are configured for timestamping after the transparent clock is configured globally.
Enable each port individually if you want to enable or disable timestamping on an individual port or range of ports.
The following example enables the PTP transparent clock mode globally.
device# configure terminal device(config)# ptp-clock transparent pkt-type ethernet option e2e step-type onestep PTP Feature Enabled
The following example enables the PTP transparent clock mode on individual ports.
device# configure terminal device(config)# interface ethernet 1/1/5 device(config-if-e25000-1/1/5)# ptp-clock transparent pkt-type ethernet option e2e step-type onestep PTP Feature Enabled on port 1/1/5
The following example enables the PTP transparent clock on a range of ports.
device(config-if-e25000-1/1/5)# interface ethernet 1/1/10 to 1/1/15 device(config-mif-1/1/10-1/1/15)# ptp-clock transparent pkt-type ethernet option e2e step-type onestep PTP Feature Enabled on port 1/1/10 PTP Feature Enabled on port 1/1/11 PTP Feature Enabled on port 1/1/12 PTP Feature Enabled on port 1/1/13 PTP Feature Enabled on port 1/1/14 PTP Feature Enabled on port 1/1/15
| Release version | Command history |
|---|---|
| 08.0.95 | This command was introduced. |