Find Technical Content
  • Home
  • Ruckus Support Portal
  • Ruckus Networks
  • Table of Contents
  • Dark Mode

Powered by Titania Delivery

⚠ This cached page may be outdated. Click refresh to get the latest content.
Cached Version You are Offline

You are viewing a cached version of this page.

You are currently offline. This page was loaded from cache.

RUCKUS SmartZone 100, SmartZone 144 Getting Started Guide 800-70611-001 Rev J

  • 1 CommScope Legal Statements
  • 2 Ruckus Back Cover
  • Preface
    • 3 Contact Information, Resources, and Conventions
      • 3.1 Contacting RUCKUS Customer Services and Support
      • 3.2 Document Feedback
      • 3.3 RUCKUS Product Documentation Resources
      • 3.4 Online Training Resources
      • 3.5 Document Conventions
      • 3.6 Command Syntax Conventions
  • 4 About This Guide
  • 5 Preparing to Set Up the Controller
    • 5.1 Unpacking the Controller
    • 5.2 Verifying the Package Contents
      • 5.2.1 Rack Mount Kit Contents
    • 5.3 Before You Begin
      • 5.3.1 Prepare the Required Hardware and Tools
      • 5.3.2 Determine Which Controller SKU You Have
      • 5.3.3 Built-in Licenses
      • 5.3.4 Get to Know the Physical Features of the Controller
        • 5.3.4.1 LEDs on the Front Panel
        • 5.3.4.2 Rear Panel
  • 6 Mounting and Powering the Controller
    • 6.1 Before You Begin
    • 6.2 What You Will Need
    • 6.3 Mounting the Controller
    • 6.4 Powering On the Controller
  • 7 Preparing the Interface Settings and Administrative Computer
    • 7.1 Preparing the Controller’s Interface Settings to Use
    • 7.2 Preparing the Administrative Computer
  • 8 Running the Setup Wizard and Logging On to the Web Interface
    • 8.1 Overview of the Setup Wizard
    • 8.2 Step 1: Start the Setup Wizard
    • 8.3 Step 2: Configure the Port Grouping
    • 8.4 Step 3: Configure the IP Settings
      • 8.4.1 If You Selected One Port Group
      • 8.4.2 If You Selected Two Port Groups
    • 8.5 Step 4: Configure the Cluster Settings
      • 8.5.1 If This Controller Is Forming a New Cluster
      • 8.5.2 If This Controller Is Joining an Existing Cluster
    • 8.6 Step 5: Verify the Settings
    • 8.7 Connecting the Controller to the Network
    • 8.8 Logging On to the Web Interface
  • 9 Ensuring That APs Can Discover the Controller on the Network
    • 9.1 Is LWAPP2SCG Enabled on the Controller?
      • 9.1.1 Operating Temperature of the APs
      • 9.1.2 Obtaining the LWAPP2SCG Application
      • 9.1.3 Enabling LWAPP2SCG
    • 9.2 Method 1: Perform Auto Discovery of the Controller Using the SmartLicense Server
    • 9.3 Method 2: Perform Auto Discovery on Same Subnet, then Transfer the AP to Intended Subnet
    • 9.4 Method 3: Register the Controller with the DNS Server
    • 9.5 Method 4: Configure DHCP Option 43 on the DHCP Server
    • 9.6 Method 5: Manually Configure the Controller Address on the AP’s Web Interface
    • 9.7 What to Do Next

What to Do Next

For more information on configuring and managing the controller, refer to the SmartZone 100 Administrator Guide for Release 3.4, which is available for download on the RUCKUS support website at http://support.ruckuswireless.com.

Note: For a complete list of documentation that is available for this SZ release, refer to the Release Notes.

Parent topic: Ensuring That APs Can Discover the Controller on the Network

Did you find what you were looking for?

Thanks!

Ruckus Wireless

© 2026 Ruckus Wireless LLC All rights reserved.

  • Accessibility
  • Privacy & Cookies
  • Do Not Sell My Information
  • Trademarks
  • Terms
  • Feedback