Find Technical Content
  • Home
  • Ruckus Support Portal
  • Ruckus Networks
  • Table of Contents
  • Dark Mode

Powered by Titania Delivery

⚠ This cached page may be outdated. Click refresh to get the latest content.
Cached Version You are Offline

You are viewing a cached version of this page.

You are currently offline. This page was loaded from cache.

RUCKUS SmartZone 100, SmartZone 144 Getting Started Guide 800-70611-001 Rev J

  • 1 CommScope Legal Statements
  • 2 Ruckus Back Cover
  • Preface
    • 3 Contact Information, Resources, and Conventions
      • 3.1 Contacting RUCKUS Customer Services and Support
      • 3.2 Document Feedback
      • 3.3 RUCKUS Product Documentation Resources
      • 3.4 Online Training Resources
      • 3.5 Document Conventions
      • 3.6 Command Syntax Conventions
  • 4 About This Guide
  • 5 Preparing to Set Up the Controller
    • 5.1 Unpacking the Controller
    • 5.2 Verifying the Package Contents
      • 5.2.1 Rack Mount Kit Contents
    • 5.3 Before You Begin
      • 5.3.1 Prepare the Required Hardware and Tools
      • 5.3.2 Determine Which Controller SKU You Have
      • 5.3.3 Built-in Licenses
      • 5.3.4 Get to Know the Physical Features of the Controller
        • 5.3.4.1 LEDs on the Front Panel
        • 5.3.4.2 Rear Panel
  • 6 Mounting and Powering the Controller
    • 6.1 Before You Begin
    • 6.2 What You Will Need
    • 6.3 Mounting the Controller
    • 6.4 Powering On the Controller
  • 7 Preparing the Interface Settings and Administrative Computer
    • 7.1 Preparing the Controller’s Interface Settings to Use
    • 7.2 Preparing the Administrative Computer
  • 8 Running the Setup Wizard and Logging On to the Web Interface
    • 8.1 Overview of the Setup Wizard
    • 8.2 Step 1: Start the Setup Wizard
    • 8.3 Step 2: Configure the Port Grouping
    • 8.4 Step 3: Configure the IP Settings
      • 8.4.1 If You Selected One Port Group
      • 8.4.2 If You Selected Two Port Groups
    • 8.5 Step 4: Configure the Cluster Settings
      • 8.5.1 If This Controller Is Forming a New Cluster
      • 8.5.2 If This Controller Is Joining an Existing Cluster
    • 8.6 Step 5: Verify the Settings
    • 8.7 Connecting the Controller to the Network
    • 8.8 Logging On to the Web Interface
  • 9 Ensuring That APs Can Discover the Controller on the Network
    • 9.1 Is LWAPP2SCG Enabled on the Controller?
      • 9.1.1 Operating Temperature of the APs
      • 9.1.2 Obtaining the LWAPP2SCG Application
      • 9.1.3 Enabling LWAPP2SCG
    • 9.2 Method 1: Perform Auto Discovery of the Controller Using the SmartLicense Server
    • 9.3 Method 2: Perform Auto Discovery on Same Subnet, then Transfer the AP to Intended Subnet
    • 9.4 Method 3: Register the Controller with the DNS Server
    • 9.5 Method 4: Configure DHCP Option 43 on the DHCP Server
    • 9.6 Method 5: Manually Configure the Controller Address on the AP’s Web Interface
    • 9.7 What to Do Next

Preparing the Interface Settings and Administrative Computer

In this section:

  1. Preparing the Controller’s Interface Settings to Use
  2. Preparing the Administrative Computer

Did you find what you were looking for?

Thanks!

Ruckus Wireless

© 2026 Ruckus Wireless LLC All rights reserved.

  • Accessibility
  • Privacy & Cookies
  • Do Not Sell My Information
  • Trademarks
  • Terms
  • Feedback