RUCKUS SmartZone 100, SmartZone 144 Getting Started Guide
- 1 CommScope Legal Statements
- 2 Ruckus Back Cover
- Preface
- 4 About This Guide
- 5 Preparing to Set Up the Controller
- 5.1 Unpacking the Controller
- 5.2 Verifying the Package Contents
- 5.2.1 Rack Mount Kit Contents
- 5.3 Before You Begin
- 5.3.1 Prepare the Required Hardware and Tools
- 5.3.2 Determine Which Controller SKU You Have
- 5.3.3 Built-in Licenses
- 5.3.4 Get to Know the Physical Features of the Controller
- 5.3.4.1 LEDs on the Front Panel
- 5.3.4.2 Rear Panel
- 6 Mounting and Powering the Controller
- 7 Preparing the Interface Settings and Administrative Computer
- 8 Running the Setup Wizard and Logging On to the Web Interface
- 8.1 Overview of the Setup Wizard
- 8.2 Step 1: Start the Setup Wizard
- 8.3 Step 2: Configure the Port Grouping
- 8.4 Step 3: Configure the IP Settings
- 8.5 Step 4: Configure the Cluster Settings
- 8.6 Step 5: Verify the Settings
- 8.7 Connecting the Controller to the Network
- 8.8 Logging On to the Web Interface
- 9 Ensuring That APs Can Discover the Controller on the Network
- 9.1 Is LWAPP2SCG Enabled on the Controller?
- 9.2 Method 1: Perform Auto Discovery of the Controller Using the SmartLicense Server
- 9.3 Method 2: Perform Auto Discovery on Same Subnet, then Transfer the AP to Intended Subnet
- 9.4 Method 3: Register the Controller with the DNS Server
- 9.5 Method 4: Configure DHCP Option 43 on the DHCP Server
- 9.6 Method 5: Manually Configure the Controller Address on the AP’s Web Interface
- 9.7 What to Do Next