system-max ip-route-vrf

Configures default maximum IPv4 routes to be allocated per user-defined VRF.
Syntax
system-max ip-route-vrfnumber
no system-max ip-route-vrfnumber
Command Default

The default number of the maximum IPv4 routes to be allocated per uesr-defined VRF depends on the platform. Refer to the Usage Guidelines section.

Parameters
number
Specifies the number of maximum IPv4 routes to be allocated per uesr-defined VRF. Refer to the Usage Guidelines section.
Modes

Global configuration mode

Usage Guidelines

The maximum, minimum, and the default number of IPv4 routes to be allocated per user-defined VRF depends on the platform.

Platform Minimum Default Maximum
ICX 7250 N/A N/A N/A
ICX 7450 128 1024 15168
ICX 7650 64 4096 131072
ICX 7750 64 4096 131072

For ICX 7250, ICX 7450 and ICX 7650 devices, if the maximum number of routes are not configured, the default is considered the maximum IPv4 routes to be allocated per user-defined VRF. Once this value is reached, routes are not added and a SYSLOG is generated. Refer to the SYSLOG Message Descriptions section of the RUCKUS FastIron Monitoring Configuration Guide for more information.

The no form of the command resets the number of maximum IPv4 routes to be allocated per user-defined VRF to the default.

Examples

The following example configures the number of IPv4 routes to be allocated per user-defined VRF as 1500. 

device# configure terminal
device(config)# system-max ip-route-vrf 1500
device(config)# write memory

The following example configures the number of IPv4 routes to be allocated per user-defined VRF as 15168 for an ICX 7450 device. 

device# configure terminal
device(config)# system-max ip-route-vrf 15168
device(config)# write memory
Parent topic: Commands Si - Z