rconsole
A remote console session is not established with a stack member.
Privileged EXEC mode
Member and standby controller stack units can use the rconsole command only
to establish a remote connection to the active controller. By default, a stack
unit's console is automatically redirected to the active controller's console.
If
the user has terminated the rconsole session on a stack member to place the unit
in
local console mode, the rconsole active command can be used to
reconnect to the active controller console, The rconsole command must
be followed by the keyword active when the target unit is the
stack active controller. Attempting to use the unit ID of the active controller
produces an error.
In the following example, a remote console session is established with stack unit 2.
device# rconsole 2 Connecting to unit 2... (Press Ctrl-O X to exit) rconsole-2@device# show stack ID Type Role Mac Address Prio State Comment 2 S ICX7450-24P standby 0000.00e2.ba40 0 local Ready rconsole-2@device# exit rconsole-2@device> exit Disconnected. Returning to local session...
| Release version | Command history |
|---|---|
| 08.0.00a | This command was introduced. |