copy disk0

Copies the license, running configuration, and startup configuration from disk0 to flash.
Syntax
copy disk0 [ license | running-config | startup-config ] filename
Parameters
license
Copies the software license from disk0 to flash.
running-config
Copies the running configuration from disk0 to flash.
startup-config
Copies the startup-configuration from disk0 to flash.
Modes

Privileged EXEC mode

Usage Guidelines

Use the show files command to verify if the running configuration and startup configuration are copied to flash correctly. Use the show license command to verify if the license is copied correctly.

Examples

The following example shows copying the license from disk0 to flash. 

device# copy disk0 license 20140611132829945ICX7450-PREM-LIC-SW.XML unit 1

Copy Software License from disk0 to Flash

The following example shows copying the running configuration from disk0 to flash. 

device# copy disk0 running-config running-config

The following example shows copying the log file. 

device# copy flash disk0 file ./logs/pid-log.txt pid-log-ruckus
Done.
History
Release version Command history
08.0.30 This command was introduced.
Parent topic: Commands C