multi-stack-port
Converts both ends of a trunked link between stacking trunks in a traditional stack
to links between untrunked ports.
Syntax
multi-stack-port
stack-unit/slot/port
and
stack-unit/slot/port
no multi-stack-port
stack-unit/slot/port
and
stack-unit/slot/port
Parameters
Modes
Stack unit configuration mode
Usage Guidelines
The
no form of the command removes the stack-ports.
Use this command only when the trunk is live.
Only primary stacking ports can be designated in the command.
Examples
The following example converts the stacking trunk between stack unit 3 and stack unit 4 to a link between untrunked ports.
device# configure terminal device(config)# stack unit 1 device(config-unit-3)# multi-stack-port 3/2/1 and 4/2/1
History