`key-server-priority`

Configures the MACsec key-server priority for the MACsec Key Agreement (MKA) group.

Syntax

key-server-priority value

no key-server-priority value

Command Default

Key-server priority is set to 16. This is not displayed in configuration details.

Parameters

value: Specifies key-server priority. The possible values range from 0 to 255, where 0 is highest priority and 255 is lowest priority.

Modes

dot1x-mka-cfg-group mode

Usage Guidelines

MACsec commands are supported only on ICX 7450, ICX 7650, and ICX 7850 devices.

The no form of the command removes the previous priority setting.

During key-server election, the server with the highest priority (the server with the lowest key-server priority value) becomes the key-server.

Examples

The following example sets the key-server priority for MKA group test1 to 5.

device(config)# dot1x-mka-enable
device(config-dot1x-mka)# mka-cfg-group test1
device(config-dot1x-mka-group-test1)# key-server-priority 5

History

Release version	Command history
08.0.20	This command was introduced.
08.0.20a	This command was modified. The key-server priority value range was increased from 0 through 127 to 0 through 255.
08.0.30	Support for this command was added on ICX 7450 devices.
08.0.70	Support for this command was added on ICX 7650 devices.
08.0.90	Support for this command was added on ICX 7850 devices.

key-server-priority