copy tftp system-manifest
copy tftp system-manifest
{
ipv4-address
|
ipv6-address
}
file-name
{
primary
|
secondary
}
[
router-image
|
switch-image
]
Privileged EXEC mode
This command only accepts manifest files with a .txt extension. Before starting any download, the file is checked for the correct keywords and extracts the image name and location.
The manifest file consists of images of both router and switch type. Commands in the file check if the system is running a router or a switch image and then installs the appropriate images.
Beginning with 08.0.90, the options 'all-images-primary' and 'all-images-secondary' have been replaced by 'primary' and 'secondary'.
In an 802.1br Campus Fabric (SPX) system, the command can be entered from the master active controller of the control bridge (CB) or from a standalone ICX device acting as the CB. The manifest file download installs the ICX router image from the active controller on all the CB units in the CB stack first and then installs the correct ICX router image on all PE units in the SPX system.
After the relevant images have been installed on the system, the user is notified that the upgrade is complete and is prompted to reload the system for the new images to take effect.
The following example downloads the normal images from the specified TFTP server location.
device# copy tftp system-manifest 10.70.42.172 stage/FI08040_Manifest.txt secondary Flash Memory Write (8192 bytes per dot) ..... DOWNLOADING MANIFEST FILE Done. Manifest upgrade in progress... SYSLOG: <14> Jul 2 04:21:42 MANIFEST_FILE_DOWNLOAD_DONE Flash Memory Write (8192 bytes per dot) Automatic copy to member units: 1 ... COPY ICX7450 SIGNATURE TFTP to Flash Done SYSLOG: <14> Jul 2 04:21:43 ICX7450_SIG_COPY_DONE Load to buffer (8192 bytes per dot) Automatic copy to member units: 1 SYSLOG: <14> Jul 2 04:21:43 COPY IMAGE TO FLASH START ... SYNCING IMAGE TO FLASH. DO NOT SWITCH OVER OR POWER DOWN THE UNIT(8192 bytes per dot)... ... Copy ICX7450 from TFTP to Flash Done. SYSLOG: <14> Jul 2 04:23:09 ICX7450_IMAGE_COPY_DONE Flash Memory Write (8192 bytes per dot) Automatic copy to member units: 1 DOWNLOAD OF ICX7450 BOOT SIGNATURE Done. SYSLOG: <14> Jul 2 04:23:10 ICX7450_BOOT_SIG_COPY_DONE Load to buffer (8192 bytes per dot) Automatic copy to member units: 1 SYSLOG: <14> Jul 2 04:23:10 COPY IMAGE TO FLASH START .................. SYNCING IMAGE TO FLASH. DO NOT SWITCH OVER OR POWER DOWN THE UNIT(8192 bytes per dot)... ................ ICX7450 Boot IMAGE COPY IS DONE Manifest file download is complete, please reload the system SYSLOG: <14> Jul 2 04:23:58 ICX7450_BOOT_IMAGE_COPY_DONE SYSLOG: <14> Jul 2 04:23:58 MANIFEST_COPY_DONE Copying the downloaded/created manifest file from ramfs to flash... Copy Done.